Dangerous Power G3 Spec R Manual - Mcarterbrown.com

OPERATING PRESSURE REGULATOR (OPR)DISASSEMBLY AND MAINTENANCE (CONTINUED)OPERATING PRESSURE REGULATOR (OPR)DISASSEMBLY AND MAINTENANCE (CONTINUED)CLEANING AND MAINTENANCE OF OPR1. Remove all visible debris and dirt with a lightly dampened and clean cotton cloth. Take care not to scratch thesurface of any regulator parts.2. Lightly apply a small amount of DP-40 lubricant to the tip of a cotton swab. (SEE PIC A)3. Apply lubricant to the o-ring located on the base of the Regulator Adjustment Screw. (SEE PIC B).4. Apply lubricant to the o-ring located on the base of the OPR Piston. (SEE PIC C)5. Apply lubricant to the o-ring located on the stem of OPR Piston. (SEE PIC D)6. Apply lubricant to the 2 o-rings located on the OPR Top Housing Ring. (SEE PIC E . F)Be careful not to apply excess pressure, as doing so may damage sensitive parts and/or strip delicate threads.NOTECAREFULLY INSPECT O-RING PRIOR TO APPLYING LUBRICANT. REPLACE IF O-RING APPEARSWORN, CRACKED, TORN, OR DAMAGED.ABCDEF34 W W W . D A N G E R O U S P O W E R . C O M35