Wadkin ECA Tenoner Manual and Parts List

TENON BLOCK ADZE CUTTER GRINDING ATTACHMENTUSED ON UNIVERSAL CUTTER GRINDER, TYPE N. H.This attachment provides an accurate method of grinding and maintainingadze cutters by mechanical methods. consists of a fixed finger workingcutter, the cutterblock assembly being mounted on the swivellingsupplied with the attachment will accommodate any Wadkin tenonFIG. 24Fig. 24 shows the mounting of the block.Blocks from machines E. C. A. are mounted on the 1 if! diameter portionThe swivelling table is mounted on the machine table, dividing head and tailstockplaced in position.No. 4 Morse taper dead centre is now fitted irito the bore of the dividing head,plete with block being mounted between the two centres in the head tailstoplete table assembly as shown in Fig. 2 The dividing head will beposes so this can be locked. The screws holding the spur cuttersloosened and the spur cutters dropped below the cuttingcutters fouling the grinding wheel during the grindingwww.wadkin.cominfo@wadkin.comPage 23