TMdrive®-10e2 Product Application Guide - Tmeic.com

Flexible I/O InterfaceTMdrive-10e2 features a flexible I/O system allowing a variety of I/O to connect directly to each inverter. Standard I/O shownbelow is always supplied. Additionally, either option unit A or B may be specified to extend I/O capability.Standard I/OLAN Interface OptionsDigital Inputs24 V dc10 mA• Quantity 2 for UVS (SIL 2)• Quantity 4 configurable mappingTC-net I/O• 8 words in/outDigital OutputsAnalog Inputs+/- 10 V dc4-20 mA24 V dc50 mAA/D• Quantity 2 for UVS (SIL 2)• Quantity 4 user defined• Open Collector• Quantity 1 configurable• Differential• 13-bit resolutionEthernet Global Data (EGD)Profibus-DPModbus RTU• 10 words in/out• 10 words in/out• 10 words in/outAnalog Outputs(Optional)Speed FeedbackResolver InputSpeed FeedbackEncoder InputSpeed TachFollower OutputD/AA+/- 10 V dc1 mASinCosSinCosB 25 mAZ12-24 V dcFdbk ExcitnABZSupply Excitn• Quantity 1 user defined• Non-Isolated• 10-bit resolution• Excitation frequency of 1 or 4 kHz• Source for resolvers isTamagawa:www.tamagawa-seiki.co.jp• A quad B with marker• Maximum frequency of 100 kHz• Differential or single-ended5 or 15 V dc• A quad B with marker• Maximum frequency of 100 kHzControlNetDeviceNetSafety Integrity• 10 words in/out• 4 words in, 10 words outTOSLINE-S20 and ISBus legacy LANs can also be supportedon request.Safety features according to IEC 618005-2 (Safety Integration Level2) and ISO 13849-1 (Category 3). Safety integrity level 2/category 3is insured by independent gate command lockout via two hardwareinputs; UVS1 and UVS2. In addition, when the optional output contactoris supplied it is also disabled by the UVS1 signal providing additionalprotection.MotorTemperatureFeedbackM• High-resolution torque motortemperature feedback• 1 kΩ positive temperaturecoefficient RTD or other sensorrequires selecting Option UnitGate Commandfrom controlUVS 215 VGate DriveDO_UVS2MOptionUVS1DO_UVS1Contactor Commandfrom controlOption I/O Unit AOption I/O Unit BDigital Inputs24 V dc10 mA• Adds Quantity 5 configurable• Relay or solid stateDigital Inputs24 V dc10 mA• Adds Quantity 6 configurable• Relay or solid stateDigital Outputs24 V dc• Adds Quantity 5 user defined• Relay (1 A) or solid state (70 mA)Digital Outputs24 V dc• Adds Quantity 6 user defined• Relay (1A) or solid state (70mA))Analog Inputs±10 V4-20 mAA/D• Adds one isolated channelAnalog Inputs±10 V4-20 mAA/D• Adds two isolated channelsAnalog OutputsD/A±10 V• Adds one isolated channelAnalog OutputsD/A±10 V• Adds two isolated channels1234567Option I/OUnit (A or B)CTRLANXIO1234567CTRLANXIOOption I/OUnit (A or B)Tool PortOption Unit Arequires oneslot tomount indraw-outenclosures.1234567CTRLANXIOOption I/OUnit ATool PortOption Unit Brequires twoslots tomount indraw-outenclosures.123456CTRLANXIOOption I/OUnit B6Cubicle Panel (600 mm) Cubicle Panel (800 mm) Draw-out Panel (Option A) Draw-out Panel (Option B)