ROTAX MOJO MAX Challenge Technical ... - Rotaxmax.ch
ROTAX MOJO MAX Challenge Technical ... - Rotaxmax.ch
ROTAX MOJO MAX Challenge Technical ... - Rotaxmax.ch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
• Top bore diameter 2,60 +/- 0,15 mm• 4 x4 cross holes diameter:Plug gauge 0,90 mm may not enter one of the 16 cross holes (usejet gauge set <strong>ROTAX</strong> part no. 281 920).0,90o) Idle jets:• Idle jets stamped 30, 35, 40, 45, 50, 55 and 60 only are legal to beused.It is not mandatory that idle jet and idle emulsion tube show thesame size.• Plug gauge 0,65 mm may not enter the bore of the idle jet 60 (use jetgauge set <strong>ROTAX</strong> part no. 281 920).p) Idle emulsion tube:• Idle emulsion tube stamped 30, 35, 40, 45, 50, 55 and 60 are legal tobe used.It is not mandatory that idle emulsion tube and idle jet show thesame size.page 22 of 53 RMC/RMCGF <strong>Te<strong>ch</strong>nical</strong> Regulations 2013/Bul.1 Edition: 10.01.2013