ROTAX MOJO MAX Challenge Technical ... - Rotaxmax.ch
ROTAX MOJO MAX Challenge Technical ... - Rotaxmax.ch
ROTAX MOJO MAX Challenge Technical ... - Rotaxmax.ch
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
) Steel clut<strong>ch</strong> and clut<strong>ch</strong> drum of new clut<strong>ch</strong> version must be within followingspecifications.• Height of clut<strong>ch</strong>:Minimum: 14,45 mm• Thickness of clut<strong>ch</strong> shoeMeasurement has to be done at the 3 open ends of the clut<strong>ch</strong> shoes, 5 -10 mm from the ma<strong>ch</strong>ined groove (all clut<strong>ch</strong> shoes must be completelyclosed at measurement - no gap). No measurement may be below 24,10mm.• Outer diameter of clut<strong>ch</strong> drumDiameter has to be measured with a sliding caliper just beside the radiusfrom the shoulder (not at the open end of the clut<strong>ch</strong> drum).Minimum diameter: 89,50 mm.page 40 of 53 RMC/RMCGF <strong>Te<strong>ch</strong>nical</strong> Regulations 2013/Bul.1 Edition: 10.01.2013
Change language