ISARLAB - Inverse Synthetic Aperture Radar Simulation - Defence ...

DSTO-GD-0210returning to its original color):• it turns recording off (which is seen by the Record button going from red to itsoriginal color);• resets the image counter, which is used to generate each image’s title on theDisplay Panel;• blanks the Display Panel;• clears the current array of filedata, if selected on the Reset Options window;• clears the current movie, if selected on the Reset Options window; and• finally, in simulation mode only, it also sets the scenario and scatterer positionsand induced motion state to those that existed at the start of the simulation.10. Using Trial Data10.1 Data Input Using the Load Menu10.1.1 PurposeThe Load pull-down menu (Figure 13) allows trial data, radar signal parameters, ananimated “movie” of images or user preferences to be loaded. A similar Save menuallows the same things to be save to file. These facilities are designed to stop the userwasting time repetitively entering parameters and also avoid the need to rememberthem.10.1.2 Using this window1. Change to a working directory (if the current directory is not the one that holdsthe desired information). This step is unnecessary if you prefer to use fullFigure 13: The Display Panel showing the File Load pull-down menu.33