K-Series (15-20 KHA) - Allied Commercial

FEATURES AND BENEFITSHCPNOIMJDFGALBEKK-Series rooftop units from Allied are the new standard for reliable, efficient rooftop units built for long-lastingperformance that can significantly improve indoor environments. K-Series rooftop units feature:• R-410A Refrigerant - Environmentally friendly.• Scroll Compressors - Single speed scroll compressors are furnished on all models.• Crankcase Heaters - Protect compressors from refrigerant liquid migration in the off cycle improving productreliability.• High Pressure Switches - Protect compressor.• Isolated Compressor Compartment - Allows performance check during normal compressor operation withoutdisrupting airflow.• Independent Outdoor Fan Motor Mounts - Allows for easy and efficient service access without removing the toppanel.• Constant Air Volume (CAV) or Single Zone VAV Supply Fan Blower Option - Allows constant or multi-stagedair delivery.• Downflow Airflow - Horizontal airflow with optional horizontal curb.• Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle.• Corrosion-Resistant Removable, Drain Pan - Provides application flexibility, durability and improved serviceability.• Thermostatic Check/Expansion Valves - Provide peak cooling performance across the entire application range.• MERV 8 or MERV 13 Filters - Available as field installed option, provide an enhanced level of indoor air quality, andcan help the building qualify for additional LEED credits.• Common Components - Many maintenance items are standard throughout the entire product line, reducing theneed to carry different parts to the job or maintain in inventory.K-Series Packaged Heat Pump 15 and 20 Ton / Page 2

FEATURES AND BENEFITSCONTENTSAccessory Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . .26Blower Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25Electrical/Electric Heat Data . . . . . . . . . . . . . . . . . . . . . . . .20Electric Heat Capacities. . . . . . . . . . . . . . . . . . . . . . . . . . 22Features And Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Model Number Identification . . . . . . . . . . . . . . . . . . . . . . . . 1Options / Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Outdoor Sound Data . . . . . . . . . . . . . . . . . . . . . . . . . . . .23Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12Unit Clearances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Weight Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24EProtects the compressor fromoverload conditions such asdirty condenser coils, blockedrefrigerant flow, or loss of outdoorfan operation.Defrost ControlProvides a defrost cycle, if needed,every 30 or 60 or 90 minutes(adjustable) of compressor “on”time at outdoor coil temperaturebelow 35°F.Pressure switch mounted onoutdoor coil vapor line terminatesdefrost cycle.Reversing Valves4-way interchange reversing valveeffects a rapid change in directionof refrigerant flow resulting in quickchangeover from cooling to heatingand vice versa.APPROVALSUnits are ETL listed.Components bonded for groundingto meet safety standards forservicing required by UL, ULC andNational and Canadian ElectricalCodes.All models are certified inaccordance with the ULEcertification program, which isbased on AHRI Standard 340/360-2007.All models are ASHRAE 90.1-2010energy efficiency compliant andmeet or exceed requirements ofSection 6.8.Models equipped with the SingleZone VAV Supply Fan option meetCalifornia Code of Regulations,Title 24 and ASHRAE 90.1-2010Section 6.4.3.10 requirements forstaged airflow.ISO 9001 RegisteredManufacturing Quality System.WARRANTYLimited five years on compressors.Limited five years Optional HighPerformance Economizers.Limited one year all other coveredcomponents.BCDCOOLING / HEATINGSYSTEMDesigned to maximize sensibleand latent cooling performance atdesign conditions.System can operate from 30°Fto 125°F without any additionalcontrols.R-410A RefrigerantNon-chlorine based, ozone friendly,R-410A.Scroll CompressorsScroll compressors on all modelsfor high performance, reliability andquiet operation.Resiliently mounted on rubbergrommets for quiet operation.Compressor Crankcase HeatersProtects against refrigerantmigration that can occur during lowambient operation.Check/Thermal ExpansionValvesAssures optimal performancethroughout the application range.Removable element head.Filter/DriersHigh capacity bi-flow filter/drierprotects the system from dirt andmoisture.High Pressure SwitchesFGFreezestatsProtects the indoor coil fromdamaging ice build-up due toconditions such as low/no airflow,or low refrigerant charge.Coil ConstructionCopper tube construction,enhanced rippled-edge aluminumfins, flared shoulder tubingconnections, silver solderedconstruction for improved heattransfer. Factory leak tested.Indoor CoilCross row circuiting with rifledcopper tubing optimizes bothsensible and latent coolingcapacity.Outdoor CoilTwo independent formed coilsallows separation for cleaning.Condensate Drain PanPlastic pan, sloped to meetdrainage requirements of ASHRAE62.1.Side or bottom drain connections.Outdoor Coil Fan MotorsThermal overload protected, totallyenclosed, permanently lubricatedball bearings, shaft up, wire basketmount.Outdoor Coil FansPVC coated fan guard furnished.K-Series Packaged Heat Pump 15 and 20 Ton / Page 3

FEATURES AND BENEFITSBLOWER (continued)Required SelectionsSelect Constant Air Volume(CAV) or Single Zone VAVSupply Fan Supply Air BlowerOptionOrder blower motor horsepowerand drive kit number requiredwhen base unit is ordered, seeDrive Kit Specifications Table.CAV OperationOn units ordered with the ConstantAir volume (CAV) option, thesupply air blower will provide aconstant volume of air.Single Zone VAV Supply FanOperationUnits ordered with the Single ZoneVAV Supply Fan option utilize aVariable Frequency Drive (VFD) tostage the supply air blower airflow.The VFD alters the frequency andvoltage of the power supply to theblower to control blower speed.The supply air blower has twospeeds:1. Low speed for part-loadcooling operation. Note - Lowspeed is 66% of high speed.2. High speed for full loadcooling and all heat modes.Full speed blower operation is setby adjusting the motor pulley todeliver the desired air volume.The ventilation speed is selectablebetween high and low speed.NOTE - Part load airflow in coolingmode on Single Zone VAV SupplyFan units should not be set below220 cfm/nominal full load ton toreduce the risk of evaporator coilfreeze-up.The VFD has an operationalrange of -40 to 125° F outdoor airambient temperature.Lower operating costs are obtainedwhen the blower is operated onlower speeds.Single Zone VAV Supply FanSequence of OperationVentilation speed is determined bythe VENT SPEED switch settingon VFD control board (LO or HI).Blower operates in low speed formechanical cooling (Y1).Blower operates in high speedfor any other mode (free cooling,mechanical cooling Y1+Y2, andheating).Economizer damper minimumposition is fully closed inunoccupied mode.In occupied mode, the economizerdamper minimum position isdetermined by the setting of thetwo potentiometers on VFD controlboard.• LO SPD MIN POSpotentiometer sets theminimum position when bloweris operating at low speed.• HI SPD MIN POSpotentiometer sets theminimum position when bloweris operating at high speed.Options/AccessoriesField InstalledVFD Manual Bypass KitVFD Manual Bypass Control isavailable as a kit for units equippedwith the Single Zone VAV SupplyFan option.The VFD Manual Bypass Control isa manual bypass and is enabled byre-configuring the wiring on the unit.JCONTROLSUnit ControlAll control voltage is provided via a24V (secondary) transformer withbuilt-in circuit breaker protection.Heat/Cool Staging - Capable ofup to 2 heat / 2 cool staging with athird party DDC control system orthermostat.Low Voltage Terminal Block -Provides screw terminalconnections for thermostat orcontroller wiring.Night Setback Mode - Savesenergy by closing outdoor airdampers and operating supply fanon thermostat demand only.Options/AccessoriesField InstalledSmoke DetectorPhotoelectric type, installed insupply air section, return airsection or both sections. Availablewith power board and singlesensor (supply or return) or powerboard and two sensors (supply andreturn). Power board located in unitcontrol compartment.K-Series Packaged Heat Pump 15 and 20 Ton / Page 5

KFEATURES AND BENEFITSELECTRICALAll units include terminal blockand fuse block in power entryjunction box for single power entryapplication.Marked & Color-Coded WiringAll electrical wiring is color-codedand marked to identify whichcomponents it is connecting.Electrical PlugsPositive connection electrical plugsare used to connect commonaccessories or maintenance partsfor easy removal or installation.Required SelectionsVoltage ChoiceSpecify when ordering base unit.Options/AccessoriesFactory or Field InstalledDisconnect SwitchAccessible from outside of unit,spring loaded weatherproof coverfurnished.GFI Service Outlets (2)115V ground fault circuit interrupter(GFCI) type, non-powered, fieldwired.LField InstalledElectric HeatHelix wound nichrome elements,individual element limit controls,wiring harness. Unit fuse blockis furnished as standard. SeeOptions / Accessories tables forordering information.GFI Weatherproof CoverSingle-gang cover.Heavy-duty UV-resistantpolycarbonate case construction.Hinged base cover with gasket.Phase MonitorPhase monitor detects the phasingof incoming power. If the incomingpower is out of phase or if anyof the three phases are lost,an indicator LED on the phasemonitor will turn red and the unitwill not start. In normal operationwith correct incoming powerphasing, the LED will be green.NOTE - Phase Monitor isfactory Installed in the controlcompartment on all units equippedwith the Single Zone VAV SupplyFan option.MINDOOR AIR QUALITYAir FiltersDisposable 2 inch filters furnishedas standard.Options/AccessoriesField InstalledHigh Efficiency Air FiltersDisposable MERV 8 or MERV 13(Minimum Efficiency ReportingValue based on ASHRAE 52.2)efficiency 2 inch pleated filters.UVC Germicidal LampsGermicidal lamps emit ultra-violet(UV-C) energy, which has beenproven to be effective in reducingmicrobes such as viruses, bacteria,yeasts, and molds. This processeither destroys the organism orcontrols its ability to reproduce.UV-C energy greatly reduces thegrowth and proliferation of moldand other bioaerosols (bacteriaand viruses) on illuminatedsurfaces (particularly coil and drainpan).Lamps are field installed in theblower/indoor coil section.All necessary hardware forinstallation is included.Lamps operate on 208/230V powersupply. Step-down transformermust be field supplied when usedwith 460V and 575V rooftop units.Magnetic safety interlockterminates power when accesspanels are removed.Approved by ETL.Indoor Air Quality (CO 2) SensorsMonitors CO 2levels, reports tothe Unit Controller which adjustseconomizer dampers as needed.K-Series Packaged Heat Pump 15 and 20 Ton / Page 6

NOPTIONS / ACCESSORIESECONOMIZER OPTIONSFactory or Field InstalledEconomizer(Standard and High PerformanceCommon Features)Outdoor Air Hood with mistelimination filter is furnished.Mixed Air Sensor is furnished forfield installation in the rooftop unit.Sensor is factory installed whenEconomizers are factory installed.Standard Economizer Features(Not for Title 24)Parallel, gear-driven action, returnair and outdoor air dampers,plug-in connections to unit, nylonbearings, neoprene seals, 24-volt, fully-modulating spring returnmotor.Standard EconomizerControl ModuleThe StandardEconomizerControl Modulecan be adjustedto operate basedon outdoor airtemperatures.Economizer Controls:• Damper Minimum Position- Can be set lower thantraditional minimum airrequirements resulting in costsavings.• IAQ Sensor - Signalsdampers to modulate andmaintain 55°F when CO 2ishigher than the CO 2setpoint.• Demand Control Ventilation(DCV) LED - A steady greenDemand Control VentilationLED indicates the IAQ readingis higher than setpoint andrequires more fresh air.• Free Cool LED - A steadygreen LED indicates outdoorair is suitable for free cooling.Free Cooling runs when outdoorair temperature is lower thanthe set temperature on theeconomizer control.NOTE: The Free Coolingdefault setting for outdoor airtemperature sensor is 55°F.High PerformanceEconomizer FeaturesApproved for California Title 24building standards.ASHRAE 90.1-2010 compliant.Gear-driven action, high torque24-volt fully-modulating springreturn damper motor, return airand outdoor air dampers, plug-inconnections to unit, stainless steelbearings, enhanced neopreneblade edge seals and flexiblestainless steel jamb seals tominimize air leakage.NOTE - High PerformanceEconomizers are not approved foruse with enthalpy controls in Title24 applications.High PerformanceEconomizer Control ModuleModuleprovides inputsand outputsto controleconomizerbased onparameter settings. Moduleautomatically detects sensors bypolling to determine which sensorsare installed in system.Module displays any alarmmessages (fault detectionand diagnostics) as an aid introubleshooting.Non-volatile memory retainsparameter settings in case ofpower failure.Keypad with four navigationbuttons and LCD screen isfurnished for setting economizerparameters.• Menu Up/Exit buttonreturns to the main menu.• Arrow Up button movesto the previous or nextparameter within the selectedmenu.• Arrow Down button movesto the next parameter withinthe selected menu.• Select (enter) buttonconfirms parameter selection.Main Menu Structure:• STATUS (economizer andsystem operation status)• SETPOINTS (settings forvarious setpoint parameters)• SYSTEM SETUP (settings/information about the system)• ADVANCED SETUP (freezeprotection, CO 2settings,stage 3 delay and additionalcalibration settings)• CHECKOUT (damperpositions)• ALARMS (output signal thatcan be configured for remotealarm monitoring)NOTE - The free cooling setpointfor Title 24 applications must beset based on the Climate Zonewhere the system is installed.See Section 140.4 “PrescriptiveRequirements for SpaceConditioning Systems” of theCalifornia Energy Commission’s2013 Building Energy EfficiencyStandards.Refer to Installation Instructionsfor complete setup informationand menu parameters available.Factory or Field InstalledSingle Enthalpy TemperatureControl(Not for Title 24)Enthalpy sensor enables theeconomizer when the outdoor airenthalpy is below the configuredsetpoint.Field InstalledDifferential Enthalpy Control(Not for Title 24)Order two Single Enthalpy ControlKits. One is field installed in thereturn air section, the other in theoutdoor air section. Allows theeconomizer control board to selectbetween outdoor air or return air,whichever has lower enthalpy.K-Series Packaged Heat Pump 15 and 20 Ton / Page 7

OPOPTIONS / ACCESSORIESEXHAUST OPTIONSFactory or Field InstalledDownflow Barometric ReliefDampers With Exhaust HoodAllow relief of excess air.Aluminum blade dampers preventblow back and outdoor airinfiltration during off cycle.Exhaust hood with bird screen isfurnished.Field InstalledHorizontal Barometric ReliefDampers With Exhaust HoodFor use when unit is configured forhorizontal applications requiring aneconomizer.Allows relief of excess air.Aluminum blade dampers preventblow back and outdoor airinfiltration during off cycle.Field installed in return air duct.Exhaust hood with bird screen isfurnished.Power Exhaust FanInstalls internal to unit for downflowapplications only with economizeroption. Provides exhaust airpressure relief. Interlocked to runwhen supply air blower is operating,fan runs when outdoor air dampersare 50% open (adjustable), motoris overload protected. RequiresEconomizer with Outdoor Air Hoodand Downflow Barometric ReliefDampers. Dual fans are 20 in.diameter with 5 blades with (2) 1/3hp motors.OUTDOOR AIR OPTIONSFactory or Field InstalledOutdoor Air Damper - Downflowor Horizontal With Air HoodLinked mechanical dampers, 0 to25% (fixed) outdoor air adjustable,installs in unit. Includes outdoor airhood.Automatic model features fullymodulating spring return dampermotor with plug-in connection.Manual model features parallelblade, gear-driven dampers withadjustable fixed position.Outdoor Air Hood is included whendamper is factory installed andis furnished with damper whenordered for field installation.ROOF CURBSNailer strip furnished, matesto unit, US National RoofingContractors Approved, shippedknocked down.Hybrid Roof Curbs, DownflowRoof curb can be assembled usinginterlocking tabs to fasten cornerstogether. No tools required.Curb can also be fastened togetherwith furnished hardware.Available in 8, 14, 18, and 24 inchheights.Adjustable Pitch Curb, DownflowFully adjustable pitch curbs (3/4 in.per foot in any direction) providea level platform for rooftop unitsallowing flexible installationson roofs with uneven or slopedangles.Uses interlocking tabs to fastencorners together. No tools required.Hardware is furnished to connectupper curb with lower curb.Available in 14 inch height.HorizontalConverts unit from downflow tohorizontal (side) air flow, return airis on unit, supply air is on curb,see dimension drawings. Curbs forrooftop applications meet NationalRoofing Code requirements.Requires Horizontal Return AirPanel Kit. Available in 26, 30, 37and 41 inch heights. OptionalInsulation Kit is available to helpprevent sweating.Adaptor Curbs (not shown)Curbs are regionally sourced.Dimensions will vary basedupon the source. Contact yourlocal sales representative for adetailed cut sheet with applicabledimensions.CEILING DIFFUSERSCeiling Diffusers(Flush or Step-Down)Aluminum grilles, large centergrille, insulated diffuser box withflanges, hanging rings furnished,interior transition (even air flow),internally sealed (preventsrecirculation), adapts to T-barceiling grids or plaster ceilings.Transitions (Supply and Return)Used with diffusers, installsin roof curb, galvanized steelconstruction, flanges furnished forduct connection to diffusers, fullyinsulated.K-Series Packaged Heat Pump 15 and 20 Ton / Page 8

OPTIONS / ACCESSORIESItem DescriptionModelNumberCatalogNumber180 240COOLING SYSTEMCondensate Drain Trap PVC - C1TRAP20AD2 76W26 X XCopper - C1TRAP10AD2 76W27 X XCorrosion Protection Factory O ODrain Pan Overflow Switch C1SNSR71FF1- 10C24 X XEfficiency Standard O OLow Ambient Kit K1SNSR33CS1 55W73 X XRefrigerant Type R-410A O OBLOWER - SUPPLY AIRBlower Options CAV (Constant Air Volume) Factory O OSingle Zone VAV Supply Fan Factory O OMotors - Constant Air Volume (CAV) Belt Drive - 3 hp Factory OBelt Drive - 5 hp Factory O OBelt Drive - 7.5 hp Factory O OBelt Drive - 10 hp Factory OMotors - Single Zone VAV Supply Fan Belt Drive - 3 hp Factory OBelt Drive - 5 hp Factory O OBelt Drive - 7.5 hp Factory O OBelt Drive - 10 hp Factory OVFD Manual Bypass Kit(for Single Zone VAV SupplyFan equipped units)Drive KitsSee Blower Data Tables for usage andselection3 hp, 5 hp (208/230V)3 hp, 5 hp, 7.5 hp, 10 hp (460V and 575V)KVFDB11C-1 90W52 X X7.5 hp, 10 hp (208/230V) KVFDB10C-1 90W51 X XKit #1 535-725 rpm Factory OKit #2 710-965 rpm Factory OKit #3 685-856 rpm Factory O OKit #4 850-1045 rpm Factory O OKit #5 945-1185 rpm Factory O OKit #6 850-1045 rpm Factory O OKit #7 945-1185 rpm Factory O OKit #8 1045-1285 rpm Factory O OKit #10 1045-1285 rpm Factory OKit #11 1135-1365 rpm Factory OCABINETCombination Coil/Hail Guards K1GARD51C-1 13T26 X XHinged Access Panels Factory O OCONTROLSBACnet ® KOCTRL31C-1 96W16 OX OXBACnet ® Thermostat with Display KOSNSR01FF1 97W23 X XBACnet ® Thermostat without Display KOSNSR00FF1 97W24 X XPlenum Cable (75 ft.) KOMISC00FF1 97W25 X XSmoke Detector - Supply or Return (Power board and one sensor) C1SNSR44C-1 83W40 X XSmoke Detector - Supply and Return (Power board and two sensors) C1SNSR43C-1 83W41 X XNOTE - Catalog and model numbers shown are for ordering field installed accessories.OX - Configure To Order (Factory Installed) or Field InstalledO = Configure To Order (Factory Installed)X = Field InstalledK-Series Packaged Heat Pump 15 and 20 Ton / Page 9

OPTIONS / ACCESSORIESItem DescriptionModelNumberCatalogNumber180 240INDOOR AIR QUALITYAir FiltersHigh Efficiency Air FiltersMERV 8 - C1FLTR15C-1- 54W67 X X24 x 24 x 2 (Order 6 per unit)MERV 13 - C1FLTR40C-1- 52W40 X XReplacement Media Filter With Metal MeshC1FLTR30C-1- 44N61 X XFrame (includes non-pleated filter media)Indoor Air Quality (CO 2) SensorsSensor - Wall-mount, off-white plastic cover with LCD display C0SNSR50AE1L 77N39 X XSensor - Wall-mount, off-white plastic cover, no display C0SNSR52AE1L 87N53 X XSensor - Black plastic case with LCD display, rated for plenum mounting C0SNSR51AE1L 87N52 X XSensor - Wall-mount, black plastic case, no display, rated for plenumC0MISC19AE1 87N54 X XmountingCO 2Sensor Duct Mounting Kit - for downflow applications C0MISC19AE1- 85L43 X XAspiration Box - for duct mounting non-plenum rated CO 2sensorsC0MISC16AE1- 90N43 X X(87N53 or 77N39)UVC Germicidal Light Kit1UVC Light Kit (110/230v-1ph) C1UVCL10C-1 54W65 X XELECTRICALVoltage 60 hz 208/230V - 3 phase Factory O ODisconnect Switch(see Electric Heat Tables for usage)460V - 3 phase Factory O O575V - 3 phase Factory O O80 amp - C1DISC080C-1 54W85 OX OX150 amp - C1DISC150C-1 54W86 OX OX250 amp - C1DISC250C-1 54W87 OX OXGFI Service Outlets 15 amp non-powered, field-wired (208/230V, 460V only) LTAGFIK10/15 74M70 OX OX20 amp non-powered, field-wired (575V only) 67E01 X XWeatherproof Cover for GFI C1GFCI99FF1 10C89 X XELECTRIC HEAT15 kW 208/230V-3ph - C1EH0150C-1Y 53W84 X X460V-3ph - C1EH0150C-1G 53W86 X X575V-3ph - C1EH0150C-1J 53W87 X X30 kW 208/230V-3ph - C1EH0300C21Y 53W92 X X460V-3ph - C1EH0300C21G 53W94 X X575V-3ph - C1EH0300C21J 53W95 X X45 kW 208/230V-3ph - C1EH0450C21Y 54W00 X X460V-3ph - C1EH0450C21G 54W02 X X575V-3ph - C1EH0450C21J 54W03 X X60 kW 208/230V-3ph - C1EH0600C21Y 54W08 X X460V-3ph - C1EH0600C21G 54W10 X X575V-3ph - C1EH0600C21J 54W11 X X90 kW 208/230V-3ph - C1EH0900C-1Y 54W12 X460V-3ph - C1EH0900C-1G 54W14 X575V-3ph - C1EH0900C-1J 54W15 X1Lamps operate on 110-230V single-phase power supply. Step-down transformer must be field supplied for field installation in 460V and 575V rooftop units (transformeris furnished for factory installed light kits). Alternately, a separate 110V power supply may be used to directly power the UVC ballast(s).NOTE - Catalog and model numbers shown are for ordering field installed accessories.OX - Configure To Order (Factory Installed) or Field InstalledO = Configure To Order (Factory Installed)X = Field InstalledK-Series Packaged Heat Pump 15 and 20 Ton / Page 10

OPTIONS / ACCESSORIESItem DescriptionModelNumberCatalogNumber180 240ECONOMIZERStandard Economizer With Outdoor Air Hood (Not for Title 24)Standard EconomizerK1ECON20C-2 54W77 OX OXDownflow or Horizontal Applications - Includes Outdoor Air Hood, orderDownflow or Horizontal Barometric Relief Dampers separatelyStandard Economizer Controls (Not for Title 24)Single Enthalpy Control C1SNSR64FF1 53W64 OX OXDifferential Enthalpy Control (order 2) C1SNSR64FF1 53W64 X XHigh Performance Economizer With Outdoor Air Hood (Approved for California Title 24 Building Standards)High Performance EconomizerK1ECON22C-1 10U61 OX OXDownflow or Horizontal Applications - Includes Outdoor Air Hood, orderDownflow or Horizontal Barometric Relief Dampers separatelyHigh Performance Economizer Controls (Not for Title 24)Single Enthalpy Control C1SNSR60FF1 10Z75 OX OXDifferential Enthalpy Control (order 2) C1SNSR60FF1 10Z75 X XBarometric Relief Dampers With Exhaust HoodDownflow Barometric Relief Dampers C1DAMP50C 54W78 OX OXHorizontal Barometric Relief Dampers LAGEDH18/24 16K99 X XOUTDOOR AIROutdoor Air Dampers With Outdoor Air HoodMotorized K1DAMP20C-1 58W62 OX OXManual Dampers C1DAMP10C-1 54W76 OX OXPOWER EXHAUST (DOWNFLOW APPLICATIONS ONLY)Standard Static 208/230V - C1PWRE11C-1Y 75W90 X X460V - C1PWRE11C-1G 75W91 X X575V - C1PWRE11C-1J 75W92 X XROOF CURBSHybrid Roof Curbs, Downflow8 in. height C1CURB70C-1 11F58 X X14 in. height C1CURB71C-1 11F59 X X18 in. height C1CURB72C-1 11F60 X X24 in. height C1CURB73C-1 11F61 X XAdjustable Pitch Curb14 in. height L1CURB55C 43W26 X XStandard Roof Curbs, Horizontal - Requires Horizontal Return Air Panel Kit26 in. height - slab applications C1CURB14C-1 11T89 X X37 in. height - rooftop applications C1CURB16C-1 11T96 X XInsulation Kit For Standard Horizontal Curbsfor C1CURB14C-1 C1INSU11C-1- 73K32 X Xfor C1CURB16C-1 C1INSU13C-1- 73K34 X XHorizontal Return Air Panel KitRequired for Horizontal Applications with Roof Curb C1HRAP10C-1- 87M00 X XCEILING DIFFUSERSStep-Down - Order one RTD11-185 29G06 XRTD11-275-R 29G07 XFlush - Order one FD11-185 29G10 XFD11-275-R 29G11 XTransitions (Supply and Return) - Order one C1DIFF33C-1 12X68 XC1DIFF34C-1 12X70 XNOTE - Catalog and model numbers shown are for ordering field installed accessories.OX - Configure To Order (Factory Installed) or Field InstalledO = Configure To Order (Factory Installed)X = Field InstalledK-Series Packaged Heat Pump 15 and 20 Ton / Page 11

SPECIFICATIONSGeneral Data Nominal Tonnage 15 Ton 15 Ton 20 Ton 20 TonModel Number KHA180S4B KHA180S4M KHA240S4B KHA240S4MEfficiency Type Standard Standard Standard StandardBlower Type Constant Air Single Zone VAV Constant Air Single Zone VAVCoolingPerformanceVolume (CAV) Supply Fan Volume (CAV) Supply FanGross Cooling Capacity - Btuh 179,000 179,000 226,000 226,0001Net Cooling Capacity - Btuh 174,000 174,000 218,000 218,000AHRI Rated Air Flow - cfm 6000 6000 7500 7500Total Unit Power - kW 16.4 16.4 20.5 20.51EER (Btuh/Watt) 10.6 10.6 10.6 10.62IEER (Btuh/Watt) 12.2 13.2 11.2 13.0Refrigerant Type R-410A R-410A R-410A R-410ARefrigerant Charge Circuit 1 21 lbs. 0 oz. 21 lbs. 0 oz. 26 lbs. 0 oz. 26 lbs. 0 oz.FurnishedCircuit 2 21 lbs. 0 oz. 21 lbs. 0 oz. 26 lbs. 0 oz. 26 lbs. 0 oz.Heating1Total High Heat Capacity - Btuh 178,000 178,000 220,000 220,000PerformanceTotal Unit Power - kW 16.1 16.1 19.9 19.91C.O.P. 3.2 3.2 3.2 3.21Total Low Heat Capacity - Btuh 104,000 104,000 128,000 128,000Total Unit Power (kW) 14.9 14.9 18.3 18.31C.O.P. 2.05 2.05 2.05 2.05Electric Heat Available - See page 10 15-30-45-60 kW 15-30-45-60 kW 15-30-45-60-90 kW 15-30-45-60-90 kWCompressor Type (number) Scroll (2) Scroll (2) Scroll (2) Scroll (2)Outdoor Coils Net face area (total) - sq. ft. 57.0 57.0 57.0 57.0Tube diameter - in. 3/8 3/8 3/8 3/8Fins per inch 20 20 20 20Outdoor CoilFansMotor - (No.) horsepower (4) 1/3 (4) 1/3 (4) 1/3 (4) 1/3Motor rpm 1075 1075 1075 1075Total Motor watts 1500 1500 1500 1500Diameter - (No.) in. (4) 24 (4) 24 (4) 24 (4) 24Number of blades 3 3 3 3Total Air volume - cfm 15,450 15,450 15,450 15,450Indoor Coils Net face area (total) - sq. ft. 21.4 21.4 21.4 21.4Tube diameter - in. 3/8 3/8 3/8 3/8Number of rows 3 3 4 4Fins per inch 14 14 14 14Drain connection - No. and size (1) 1 in. FPT (1) 1 in. FPT (1) 1 in. FPT (1) 1in. FPT3IndoorBlowerandDriveSelectionExpansion device typeBalance port TXV, removable headNominal motor output 3 hp, 5 hp, 7.5 hp 5 hp, 7.5 hp, 10 hpMaximum usable motor output3.45 hp, 5.75 hp,5.75 hp, 8.63 hp,(US Only)8.63 hp11.5 hpMotor - Drive kit number3 hp5 hpKit 1 535-725 rpmKit 3 685-856 rpmKit 2 710-965 rpmKit 4 850-1045 rpm5 hpKit 5 945-1185 rpmKit 3 685-856 rpm7.5 hpKit 4 850-1045 rpmKit 6 850-1045 rpmKit 5 945-1185 rpmKit 7 945-1185 rpm7.5 hpKit 8 1045-1285 rpmKit 6 850-1045 rpm10 hpKit 7 945-1185 rpmKit 7 945-1185 rpmKit 8 1045-1285 rpmKit 10 1045-1285 rpmKit 11 1135-1365 rpmBlower wheel nominal(2) 15 x 15 (2) 15 x 15diameter x width - in.Filters Type of filter Fiberglass, disposableNumber and size - in. (6) 24 x 24 x 2Electrical characteristics208/230V, 460V or 575V - 60 hertz - 3 phaseNOTE - Gross cooling capacity includes evaporator blower motor heat deduction. Net coling capacity does not include evaporator blower motor heat deduction.1AHRI Certified to AHRI Standard 340/360:Cooling Ratings - 95°F outdoor air temperature and 80°F db/67°F wb entering indoor coil air.High Temperature Heating Ratings - 47°F db/43°F wb outdoor air temperature and 70°F entering indoor coil air.Low Temperature Heating Ratings - 17°F db/15°F wb outdoor air temperature and 70°F entering indoor coil air.2Integrated Energy Efficiency Ratio tested according to AHRI Standard 340/360.3Using total air volume and system static pressure requirements determine from blower performance tables rpm and motor output required. Maximum usable output ofmotors furnished are shown. In Canada, nominal motor output is also maximum usable motor output. If motors of comparable output are used, be sure to keep withinthe service factor limitations outlined on the motor nameplate.NOTE - Units equipped with Single Zone VAV Supply Fan option are limited to a motor service factor of 1.0.K-Series Packaged Heat Pump 15 and 20 Ton / Page 12

RATINGSNOTE − For Temperatures and Capacities not shown in tables, see bulletin − Cooling Unit Rating Table Correction Factor Data in Miscellaneous Engineering Data section.15 TON COOLING STANDARD EFFICIENCY KHA180S4 (1ST STAGE) - CONSTANT AIR VOLUMEOutdoor Air Temperature Entering Outdoor CoilEnteringTotal65°F 75°F 85°F 95°FWetAir Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To TotalBulbVolume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T)TemperatureCap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulbcfm kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F4800 94.6 4.8 0.7 0.82 0.93 90.4 5.34 0.7 0.83 0.95 85.9 5.95 0.71 0.84 0.97 80.8 6.62 0.72 0.86 0.9963°F 6000 99.6 4.89 0.74 0.88 1 95.1 5.42 0.75 0.89 1 90.2 6.01 0.76 0.91 1 84.9 6.69 0.78 0.94 17200 103.4 4.94 0.78 0.94 1 98.4 5.46 0.79 0.95 1 93.5 6.06 0.81 0.97 1 88.2 6.74 0.83 0.99 14800 100 4.88 0.56 0.67 0.79 95.6 5.42 0.56 0.68 0.8 90.8 6.02 0.56 0.69 0.81 85.7 6.71 0.57 0.7 0.8367°F 6000 105.2 4.97 0.59 0.72 0.85 100.5 5.5 0.59 0.73 0.86 95.5 6.1 0.59 0.74 0.88 90 6.77 0.6 0.76 0.917200 109 5.03 0.61 0.76 0.91 104 5.55 0.62 0.77 0.92 98.7 6.14 0.63 0.79 0.95 93.2 6.83 0.63 0.81 0.974800 105.1 4.97 0.43 0.54 0.65 100.8 5.5 0.43 0.55 0.66 95.8 6.1 0.43 0.55 0.67 90.5 6.77 0.43 0.55 0.6871°F 6000 110.7 5.06 0.44 0.57 0.7 105.8 5.58 0.44 0.58 0.71 100.7 6.18 0.44 0.58 0.72 95 6.86 0.44 0.59 0.737200 114.7 5.12 0.46 0.6 0.74 109.5 5.64 0.46 0.61 0.75 104.1 6.24 0.45 0.61 0.77 98.4 6.92 0.46 0.63 0.7915 TON COOLING STANDARD EFFICIENCY KHA180S4 (2ND STAGE) - CONSTANT AIR VOLUMEOutdoor Air Temperature Entering Outdoor CoilEnteringTotal85°F 95°F 105°F 115°FWetAir Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To TotalBulbVolume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T)TemperatureCap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulbcfm kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F4800 170.3 11.79 0.71 0.84 0.96 160.7 13.14 0.72 0.86 0.98 150.1 14.67 0.74 0.88 0.99 138.9 16.45 0.76 0.91 163°F 6000 179.1 11.92 0.76 0.91 1 168.7 13.27 0.78 0.93 1 157.8 14.81 0.8 0.96 1 145.8 16.57 0.82 0.98 17200 185.7 12.04 0.81 0.96 1 175 13.37 0.83 0.98 1 164.2 14.91 0.85 0.99 1 152.7 16.7 0.88 1 14800 180.3 11.94 0.57 0.69 0.81 170.2 13.29 0.57 0.7 0.83 159.8 14.84 0.57 0.72 0.85 147.9 16.62 0.58 0.73 0.8867°F 6000 189.7 12.09 0.6 0.74 0.88 178.8 13.44 0.6 0.76 0.9 167.4 14.97 0.61 0.77 0.93 154.8 16.74 0.62 0.8 0.967200 196.4 12.21 0.63 0.79 0.94 185.1 13.55 0.63 0.81 0.96 173.1 15.08 0.65 0.83 0.98 159.9 16.84 0.66 0.86 0.994800 190.1 12.1 0.43 0.55 0.67 179.8 13.46 0.43 0.56 0.68 168.7 14.99 0.43 0.56 0.69 156.3 16.77 0.42 0.57 0.7171°F 6000 200 12.27 0.44 0.58 0.72 188.6 13.61 0.44 0.59 0.73 176.9 15.14 0.44 0.6 0.75 163.9 16.91 0.44 0.61 0.787200 206.8 12.38 0.46 0.62 0.77 195.3 13.73 0.46 0.63 0.79 183 15.26 0.46 0.64 0.81 169.2 17.02 0.46 0.65 0.8415 TON HEATING STANDARD EFFICIENCY KHA180S4 - CONSTANT AIR VOLUMEIndoor CoilAir Volume70°F DryBulbcfmTotalHeatingCapacityAir Temperature Entering Outdoor Coil65°F 45°F 25°F 5°F -15°FComp. Total Comp. Total Comp. Total Comp. TotalMotor Input Heating Motor Input Heating Motor Input Heating Motor Input HeatingInput Capacity Input Capacity Input Capacity Input CapacityComp.Motor InputInputkBtuh kW kBtuh kW kBtuh kW kBtuh kW kBtuh kW4800 207.5 13.75 170.7 12.84 111.4 11.83 81.1 10.32 39.6 76956000 210.9 13.03 174.1 12.12 113.8 11.11 83.0 9.60 41.6 69807200 213.3 12.56 176.5 11.65 116.3 10.66 85.4 9.18 44.0 6560K-Series Packaged Heat Pump 15 and 20 Ton / Page 13

RATINGSNOTE − For Temperatures and Capacities not shown in tables, see bulletin − Cooling Unit Rating Table Correction Factor Data in Miscellaneous Engineering Data section.20 TON COOLING STANDARD EFFICIENCY KHA240S4 (1ST STAGE) - CONSTANT AIR VOLUMEOutdoor Air Temperature Entering Outdoor CoilEnteringTotal65°F 75°F 85°F 95°FWetAir Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To TotalBulbVolume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T)TemperatureCap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulbcfm kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F6400 122.8 5.76 0.7 0.82 0.93 117.2 6.46 0.7 0.83 0.95 111.2 7.24 0.71 0.84 0.97 104.8 8.13 0.72 0.86 0.9963°F 8000 129.5 5.84 0.74 0.88 1 123.2 6.53 0.75 0.89 1 116.7 7.31 0.76 0.91 1 110.2 8.19 0.78 0.93 19600 134.5 5.92 0.78 0.94 1 128.2 6.61 0.79 0.96 1 121.4 7.37 0.81 0.97 1 114.6 8.27 0.83 0.99 16400 130.6 5.86 0.56 0.67 0.78 124.5 6.56 0.56 0.68 0.79 118.5 7.34 0.56 0.69 0.81 111.9 8.21 0.57 0.7 0.8367°F 8000 137.5 5.95 0.58 0.71 0.84 131.1 6.65 0.59 0.72 0.86 124.5 7.42 0.59 0.74 0.88 117.3 8.3 0.6 0.75 0.99600 143 6.04 0.61 0.76 0.9 136.1 6.73 0.61 0.78 0.92 128.5 7.49 0.62 0.79 0.94 121.4 8.36 0.64 0.81 0.976400 138.3 5.97 0.43 0.54 0.65 132.2 6.66 0.43 0.54 0.65 125.6 7.44 0.43 0.55 0.66 118.8 8.32 0.42 0.55 0.6771°F 8000 145.8 6.08 0.44 0.57 0.69 138.7 6.77 0.44 0.57 0.7 131.9 7.54 0.44 0.58 0.72 124.4 8.41 0.44 0.59 0.739600 150.8 6.17 0.45 0.6 0.74 143.6 6.85 0.45 0.6 0.75 136 7.61 0.45 0.61 0.77 128.4 8.48 0.45 0.63 0.7920 TON COOLING STANDARD EFFICIENCY KHA240S4 (2ND STAGE) - CONSTANT AIR VOLUMEOutdoor Air Temperature Entering Outdoor CoilEnteringTotal85°F 95°F 105°F 115°FWetAir Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To TotalBulbVolume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T)TemperatureCap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulbcfm kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F6400 217.2 14.54 0.73 0.86 0.98 204.3 16.3 0.74 0.88 0.99 191.1 18.32 0.76 0.9 1 176.2 20.62 0.78 0.93 163°F 8000 228.1 14.7 0.78 0.93 1 214.9 16.46 0.8 0.95 1 200.6 18.46 0.82 0.98 1 185.6 20.76 0.84 1 19600 236.9 14.84 0.83 0.99 1 223.5 16.59 0.85 1 1 209.8 18.61 0.88 1 1 195 20.91 0.91 1 16400 231.5 14.73 0.57 0.71 0.83 217.9 16.51 0.58 0.72 0.85 204.1 18.53 0.58 0.73 0.87 188.1 20.81 0.59 0.75 0.967°F 8000 242.6 14.93 0.61 0.76 0.9 228.5 16.67 0.61 0.78 0.92 213.5 18.68 0.62 0.8 0.95 196.4 20.93 0.64 0.82 0.989600 251 15.07 0.64 0.82 0.96 236.1 16.79 0.65 0.83 0.98 219.7 18.78 0.67 0.86 1 202.2 21.04 0.68 0.89 16400 245.5 14.97 0.44 0.56 0.68 231.7 16.72 0.43 0.56 0.69 216.8 18.73 0.43 0.57 0.71 200.2 21.02 0.43 0.58 0.7371°F 8000 257.1 15.17 0.45 0.6 0.74 242.3 16.9 0.45 0.6 0.75 226.2 18.89 0.45 0.61 0.78 208.8 21.15 0.45 0.63 0.89600 265.7 15.31 0.46 0.63 0.79 249.9 17.03 0.46 0.64 0.81 233.2 19.01 0.47 0.66 0.84 215 21.27 0.47 0.67 0.8720 TON HEATING STANDARD EFFICIENCY KHA240S4 - CONSTANT AIR VOLUMEIndoor CoilAir Volume70°F DryBulbcfmTotalHeatingCapacityAir Temperature Entering Outdoor Coil65°F 45°F 25°F 5°F -15°FComp. Total Comp. Total Comp. Total Comp. TotalMotor Input Heating Motor Input Heating Motor Input Heating Motor Input HeatingInput Capacity Input Capacity Input Capacity Input CapacityComp.Motor InputInputkBtuh kW kBtuh kW kBtuh kW kBtuh kW kBtuh kW6400 256.9 16.68 209.9 15.53 135.3 14.39 96.7 12.59 46.3 94508000 262.3 15.67 215.3 14.52 140.3 13.38 101.3 11.59 51.0 84509600 267.6 15.04 220.6 13.89 145.3 12.76 106.1 10.98 55.8 7840K-Series Packaged Heat Pump 15 and 20 Ton / Page 14

RATINGSNOTE − For Temperatures and Capacities not shown in tables, see bulletin − Cooling Unit Rating Table Correction Factor Data in Miscellaneous Engineering Data section.15 TON COOLING STANDARD EFFICIENCY KHA180S4 (1ST STAGE) - SINGLE ZONE VAV SUPPLY FAN SUPPLY AIR BLOWEROutdoor Air Temperature Entering Outdoor CoilEnteringTotal65°F 75°F 85°F 95°FWetAir Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To TotalBulbVolume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T)TemperatureCap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulbcfm kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F3500 87 4.68 0.67 0.76 0.86 83.2 5.22 0.67 0.77 0.87 79.2 5.83 0.67 0.78 0.88 74.8 6.52 0.68 0.79 0.963°F 4000 90.8 4.74 0.68 0.79 0.89 86.8 5.28 0.69 0.8 0.9 82.4 5.88 0.69 0.81 0.92 77.8 6.57 0.7 0.82 0.944500 93.6 4.79 0.7 0.81 0.92 89.5 5.32 0.7 0.82 0.93 85.1 5.92 0.71 0.83 0.95 80.3 6.61 0.72 0.85 0.973500 91.9 4.76 0.54 0.64 0.73 88.1 5.29 0.54 0.64 0.74 83.8 5.9 0.54 0.65 0.75 79.5 6.59 0.54 0.65 0.7667°F 4000 95.8 4.81 0.55 0.66 0.76 91.8 5.35 0.55 0.66 0.76 87.4 5.96 0.55 0.67 0.77 82.5 6.64 0.56 0.68 0.794500 99 4.86 0.56 0.68 0.78 94.7 5.4 0.56 0.68 0.79 90 6 0.57 0.69 0.8 85 6.67 0.57 0.7 0.823500 96.9 4.83 0.43 0.53 0.62 92.9 5.37 0.43 0.52 0.62 88.7 5.97 0.42 0.52 0.62 84 6.66 0.42 0.53 0.6371°F 4000 100.9 4.89 0.43 0.54 0.63 96.6 5.42 0.43 0.54 0.64 92.2 6.03 0.43 0.54 0.64 87.1 6.72 0.43 0.54 0.654500 104.1 4.94 0.44 0.55 0.65 99.9 5.48 0.44 0.55 0.66 94.9 6.08 0.43 0.55 0.67 89.8 6.76 0.43 0.55 0.6815 TON COOLING STANDARD EFFICIENCY KHA180S4 (2ND STAGE) - SINGLE ZONE VAV SUPPLY FAN SUPPLY AIR BLOWEROutdoor Air Temperature Entering Outdoor CoilEnteringTotal85°F 95°F 105°F 115°FWetAir Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To TotalBulbVolume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T)TemperatureCap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulbcfm kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F4800 170.3 11.79 0.71 0.84 0.96 160.7 13.14 0.72 0.86 0.98 150.1 14.67 0.74 0.88 0.99 138.9 16.45 0.76 0.91 163°F 6000 179.1 11.92 0.76 0.91 1 168.7 13.27 0.78 0.93 1 157.8 14.81 0.8 0.96 1 145.8 16.57 0.82 0.98 17200 185.7 12.04 0.81 0.96 1 175 13.37 0.83 0.98 1 164.2 14.91 0.85 0.99 1 152.7 16.7 0.88 1 14800 180.3 11.94 0.57 0.69 0.81 170.2 13.29 0.57 0.7 0.83 159.8 14.84 0.57 0.72 0.85 147.9 16.62 0.58 0.73 0.8867°F 6000 189.7 12.09 0.6 0.74 0.88 178.8 13.44 0.6 0.76 0.9 167.4 14.97 0.61 0.77 0.93 154.8 16.74 0.62 0.8 0.967200 196.4 12.21 0.63 0.79 0.94 185.1 13.55 0.63 0.81 0.96 173.1 15.08 0.65 0.83 0.98 159.9 16.84 0.66 0.86 0.994800 190.1 12.1 0.43 0.55 0.67 179.8 13.46 0.43 0.56 0.68 168.7 14.99 0.43 0.56 0.69 156.3 16.77 0.42 0.57 0.7171°F 6000 200 12.27 0.44 0.58 0.72 188.6 13.61 0.44 0.59 0.73 176.9 15.14 0.44 0.6 0.75 163.9 16.91 0.44 0.61 0.787200 206.8 12.38 0.46 0.62 0.77 195.3 13.73 0.46 0.63 0.79 183 15.26 0.46 0.64 0.81 169.2 17.02 0.46 0.65 0.8415 TON HEATING STANDARD EFFICIENCY KHA180S4 - SINGLE ZONE VAV SUPPLY FAN SUPPLY AIR BLOWERIndoor CoilAir Volume70°F DryBulbcfmTotalHeatingCapacityAir Temperature Entering Outdoor Coil65°F 45°F 25°F 5°F -15°FComp. Total Comp. Total Comp. Total Comp. TotalMotor Input Heating Motor Input Heating Motor Input Heating Motor Input HeatingInput Capacity Input Capacity Input Capacity Input CapacityComp.Motor InputInputkBtuh kW kBtuh kW kBtuh kW kBtuh kW kBtuh kW4800 207.5 13.75 170.7 12.84 111.4 11.83 81.1 10.32 39.6 76956000 210.9 13.03 174.1 12.12 113.8 11.11 83.0 9.60 41.6 69807200 213.3 12.56 176.5 11.65 116.3 10.66 85.4 9.18 44.0 6560K-Series Packaged Heat Pump 15 and 20 Ton / Page 15

RATINGSNOTE − For Temperatures and Capacities not shown in tables, see bulletin − Cooling Unit Rating Table Correction Factor Data in Miscellaneous Engineering Data section.20 TON COOLING STANDARD EFFICIENCY KHA240S4 (1ST STAGE) - SINGLE ZONE VAV SUPPLY FAN SUPPLY AIR BLOWEROutdoor Air Temperature Entering Outdoor CoilEnteringTotal65°F 75°F 85°F 95°FWetAir Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To TotalBulbVolume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T)TemperatureCap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulbcfm kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F4500 110.9 5.6 0.66 0.75 0.84 105.9 6.3 0.66 0.76 0.85 100.8 7.09 0.66 0.77 0.87 95.3 7.98 0.67 0.78 0.8863°F 5500 118.3 5.69 0.68 0.79 0.89 112.9 6.39 0.69 0.8 0.91 107.4 7.17 0.69 0.81 0.92 101.4 8.06 0.7 0.82 0.946500 124 5.77 0.71 0.82 0.94 118.4 6.46 0.71 0.84 0.95 112.1 7.24 0.72 0.85 0.97 105.8 8.13 0.73 0.87 0.994500 118.3 5.69 0.54 0.63 0.72 113.3 6.4 0.54 0.63 0.73 107.7 7.17 0.54 0.64 0.73 102 8.07 0.53 0.64 0.7467°F 5500 126 5.79 0.55 0.66 0.76 120.4 6.49 0.55 0.66 0.77 114.7 7.28 0.55 0.67 0.78 108.3 8.16 0.56 0.67 0.796500 131.9 5.87 0.57 0.68 0.79 125.7 6.56 0.57 0.69 0.8 119.7 7.34 0.57 0.7 0.82 112.8 8.21 0.57 0.71 0.844500 125.8 5.79 0.43 0.52 0.6 120.4 6.48 0.42 0.52 0.61 114.8 7.27 0.42 0.52 0.61 108.7 8.16 0.41 0.52 0.6171°F 5500 133.7 5.89 0.43 0.53 0.63 128 6.6 0.43 0.54 0.64 121.6 7.37 0.43 0.53 0.64 115.3 8.26 0.42 0.54 0.656500 139.7 5.98 0.44 0.55 0.66 133.6 6.68 0.44 0.55 0.67 126.6 7.44 0.43 0.55 0.67 119.9 8.33 0.43 0.56 0.6920 TON COOLING STANDARD EFFICIENCY KHA240S4 (2ND STAGE) - SINGLE ZONE VAV SUPPLY FAN SUPPLY AIR BLOWEROutdoor Air Temperature Entering Outdoor CoilEnteringTotal85°F 95°F 105°F 115°FWetAir Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To TotalBulbVolume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T)TemperatureCap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulbcfm kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F kBtuh kW 75°F 80°F 85°F6400 217.2 14.54 0.73 0.86 0.98 204.3 16.3 0.74 0.88 0.99 191.1 18.32 0.76 0.9 1 176.2 20.62 0.78 0.93 163°F 8000 228.1 14.7 0.78 0.93 1 214.9 16.46 0.8 0.95 1 200.6 18.46 0.82 0.98 1 185.6 20.76 0.84 1 19600 236.9 14.84 0.83 0.99 1 223.5 16.59 0.85 1 1 209.8 18.61 0.88 1 1 195 20.91 0.91 1 16400 231.5 14.73 0.57 0.71 0.83 217.9 16.51 0.58 0.72 0.85 204.1 18.53 0.58 0.73 0.87 188.1 20.81 0.59 0.75 0.967°F 8000 242.6 14.93 0.61 0.76 0.9 228.5 16.67 0.61 0.78 0.92 213.5 18.68 0.62 0.8 0.95 196.4 20.93 0.64 0.82 0.989600 251 15.07 0.64 0.82 0.96 236.1 16.79 0.65 0.83 0.98 219.7 18.78 0.67 0.86 1 202.2 21.04 0.68 0.89 16400 245.5 14.97 0.44 0.56 0.68 231.7 16.72 0.43 0.56 0.69 216.8 18.73 0.43 0.57 0.71 200.2 21.02 0.43 0.58 0.7371°F 8000 257.1 15.17 0.45 0.6 0.74 242.3 16.9 0.45 0.6 0.75 226.2 18.89 0.45 0.61 0.78 208.8 21.15 0.45 0.63 0.89600 265.7 15.31 0.46 0.63 0.79 249.9 17.03 0.46 0.64 0.81 233.2 19.01 0.47 0.66 0.84 215 21.27 0.47 0.67 0.8720 TON HEATING STANDARD EFFICIENCY KHA240S4 - SINGLE ZONE VAV SUPPLY FAN SUPPLY AIR BLOWERIndoor CoilAir Volume70°F DryBulbcfmTotalHeatingCapacityAir Temperature Entering Outdoor Coil65°F 45°F 25°F 5°F -15°FComp. Total Comp. Total Comp. Total Comp. TotalMotor Input Heating Motor Input Heating Motor Input Heating Motor Input HeatingInput Capacity Input Capacity Input Capacity Input CapacityComp.Motor InputInputkBtuh kW kBtuh kW kBtuh kW kBtuh kW kBtuh kW6400 256.9 16.68 209.9 15.53 135.3 14.39 96.7 12.59 46.3 94508000 262.3 15.67 215.3 14.52 140.3 13.38 101.3 11.59 51.0 84509600 267.6 15.04 220.6 13.89 145.3 12.76 106.1 10.98 55.8 7840K-Series Packaged Heat Pump 15 and 20 Ton / Page 16

BLOWER DATABLOWER TABLE INCLUDES RESISTANCE FOR BASE UNIT ONLY WITH DRY INDOOR COIL & AIR FILTERS IN PLACEFOR ALL UNITS ADD:1 - Wet indoor coil air resistance of selected unit.2 - Any factory installed options air resistance (electric heat, economizer, etc.)3 - Any field installed accessories air resistance (electric heat, duct resistance, diffuser, etc.)Then determine from blower table blower motor output and drive required.See page 18 for wet coil and option/accessory air resistance data.See page 18 for factory installed drive kit specifications.MINIMUM AIR VOLUME REQUIRED FOR USE WITH OPTIONAL ELECTRIC HEATAll units require 6000 cfm minimum air with electric heat.Air VolumecfmTOTAL STATIC PRESSURE - Inches Water Gauge (Pa)0.20 0.40 0.60 0.80 1.00 1.20 1.40 1.60 1.80 2.00 2.20 2.40 2.60RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP3250 405 0.40 520 0.60 615 0.85 695 1.10 765 1.30 830 1.60 890 1.85 950 2.10 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -3500 415 0.45 530 0.70 620 0.95 700 1.20 775 1.45 840 1.70 900 2.00 955 2.25 1005 2.55 - - - - - - - - - - - - - - - - - - - - - - - -3750 425 0.50 540 0.75 630 1.05 710 1.30 780 1.60 845 1.85 905 2.15 960 2.45 1010 2.70 1060 3.00 1110 3.30 - - - - - - - - - - - -4000 435 0.55 545 0.85 635 1.10 715 1.40 785 1.70 850 2.00 910 2.30 965 2.60 1020 2.90 1070 3.25 1115 3.55 1160 3.85 1205 4.154250 445 0.60 555 0.90 645 1.25 725 1.55 795 1.85 855 2.15 915 2.45 970 2.80 1025 3.10 1075 3.45 1120 3.75 1165 4.10 1210 4.454500 455 0.70 565 1.00 655 1.35 730 1.65 800 2.00 865 2.35 925 2.65 980 3.00 1030 3.30 1080 3.65 1130 4.05 1175 4.35 1215 4.704750 470 0.75 575 1.10 660 1.45 740 1.80 810 2.15 870 2.50 930 2.85 985 3.20 1040 3.55 1085 3.90 1135 4.25 1180 4.65 1225 5.005000 480 0.85 585 1.25 670 1.60 750 1.95 815 2.30 880 2.70 940 3.05 995 3.40 1045 3.80 1095 4.15 1140 4.50 1185 4.90 1230 5.305250 495 0.95 595 1.35 680 1.70 755 2.10 825 2.50 890 2.90 945 3.25 1000 3.65 1050 4.00 1100 4.40 1150 4.80 1195 5.20 1235 5.605500 505 1.05 605 1.45 690 1.85 765 2.25 835 2.65 895 3.05 955 3.45 1010 3.85 1060 4.25 1110 4.70 1155 5.10 1200 5.50 1240 5.905750 520 1.15 615 1.60 700 2.00 775 2.45 840 2.85 905 3.25 960 3.65 1015 4.10 1065 4.50 1115 4.95 1160 5.35 1205 5.80 1250 6.256000 530 1.30 630 1.75 710 2.15 785 2.60 850 3.05 910 3.45 970 3.90 1025 4.35 1075 4.80 1120 5.20 1170 5.65 1215 6.10 1255 6.556250 545 1.40 640 1.90 720 2.35 795 2.80 860 3.25 920 3.70 975 4.15 1030 4.60 1080 5.05 1130 5.50 1175 5.95 1220 6.45 1265 6.906500 560 1.55 650 2.05 730 2.50 805 3.00 870 3.45 930 3.95 985 4.40 1040 4.85 1090 5.35 1140 5.85 1185 6.30 1225 6.75 1270 7.256750 570 1.70 665 2.20 745 2.70 815 3.20 880 3.70 940 4.20 995 4.65 1045 5.10 1095 5.60 1145 6.10 1190 6.60 1235 7.10 1275 7.607000 585 1.85 675 2.35 755 2.90 825 3.40 890 3.95 950 4.45 1005 4.95 1055 5.40 1105 5.95 1155 6.45 1200 6.95 1240 7.45 1285 8.007250 600 2.00 690 2.60 765 3.10 835 3.65 900 4.15 955 4.65 1015 5.25 1065 5.75 1115 6.25 1160 6.75 1205 7.30 1250 7.85 1290 8.357500 615 2.20 700 2.75 775 3.30 845 3.85 910 4.45 965 4.95 1020 5.50 1075 6.05 1125 6.60 1170 7.15 1215 7.65 1260 8.25 1300 8.757750 630 2.40 715 3.00 790 3.55 855 4.10 920 4.70 975 5.25 1030 5.80 1080 6.35 1130 6.90 1180 7.50 1225 8.05 1265 8.60 1305 9.158000 640 2.55 725 3.20 800 3.80 865 4.35 930 4.95 985 5.50 1040 6.10 1090 6.70 1140 7.25 1185 7.85 1230 8.40 1275 9.00 1315 9.608250 655 2.80 740 3.40 810 4.00 880 4.65 940 5.25 995 5.85 1050 6.45 1100 7.05 1150 7.65 1195 8.25 1240 8.85 1280 9.40 1325 10.058500 670 3.00 750 3.65 825 4.30 890 4.90 950 5.55 1005 6.15 1060 6.80 1110 7.40 1160 8.05 1205 8.65 1250 9.25 1290 9.85 1330 10.458750 685 3.25 765 3.90 835 4.55 900 5.20 960 5.85 1015 6.45 1070 7.15 1120 7.75 1165 8.35 1215 9.05 1255 9.65 1300 10.30 1340 10.909000 700 3.50 780 4.20 850 4.85 910 5.50 970 6.15 1025 6.80 1080 7.50 1130 8.15 1175 8.75 1220 9.40 1265 10.10 1310 10.80 1350 11.409250 715 3.75 790 4.45 860 5.15 925 5.85 985 6.55 1040 7.20 1090 7.85 1140 8.55 1185 9.20 1230 9.85 1275 10.55 1315 11.20 - - - - - -9500 730 4.00 805 4.75 875 5.45 935 6.15 995 6.90 1050 7.60 1100 8.25 1150 8.95 1195 9.60 1240 10.30 1285 11.05 - - - - - - - - - - - -9750 745 4.30 820 5.05 885 5.75 950 6.55 1005 7.20 1060 7.95 1110 8.65 1160 9.40 1205 10.05 1250 10.80 1295 11.50 - - - - - - - - - - - -10,000 760 4.60 835 5.40 900 6.15 960 6.85 1015 7.60 1070 8.35 1120 9.05 1170 9.80 1215 10.50 1260 11.25 - - - - - - - - - - - - - - - - - -10,250 775 4.90 845 5.65 910 6.45 970 7.20 1030 8.00 1080 8.75 1135 9.55 1180 10.25 1225 11.00 - - - - - - - - - - - - - - - - - - - - - - - -10,500 790 5.20 860 6.00 925 6.85 985 7.65 1040 8.40 1095 9.20 1145 10.00 1190 10.70 1235 11.45 - - - - - - - - - - - - - - - - - - - - - - - -10,750 805 5.55 875 6.40 940 7.25 1000 8.05 1055 8.85 1105 9.65 1155 10.45 1200 11.20 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -11,000 820 5.90 890 6.80 950 7.60 1010 8.45 1065 9.30 1115 10.05 1165 10.90 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -K-Series Packaged Heat Pump 15 and 20 Ton / Page 17

BLOWER DATAFACTORY INSTALLED BELT DRIVE KIT SPECIFICATIONSNominalhpMaximumhpDrive Kit NumberRPM Range3 3.45 1 535 - 7253 3.45 2 710 - 9655 5.75 3 685 - 8565 5.75 4 850 - 10455 5.75 5 945 - 11857.5 8.63 6 850 - 10457.5 8.63 7 945 - 11857.5 8.63 8 1045 - 128510 11.50 7 945 - 118510 11.50 10 1045 - 128510 11.50 11 1135 - 1365NOTE - Using total air volume and system static pressure requirements determine from blower performance tables rpm and motor output required. Maximum usableoutput of motors furnished are shown. In Canada, nominal motor output is also maximum usable motor output. If motors of comparable output are used, be sure to keepwithin the service factor limitations outlined on the motor nameplate.NOTE – Units equipped with Single Zone VAV Supply Fan option are limited to a motor service factor of 1.0.FACTORY INSTALLED OPTIONS/FIELD INSTALLED ACCESSORY AIR RESISTANCE - in. w.g.Air VolumecfmWet Indoor CoilFiltersElectric Heat Economizer180S 240S MERV 8 MERV 13Horizontal RoofCurb3250 0.02 0.03 - - - - - - 0.01 0.04 0.043500 0.02 0.03 - - - - - - 0.01 0.04 0.053750 0.02 0.03 - - - - - - 0.01 0.04 0.054000 0.02 0.04 - - - - - - 0.01 0.04 0.064250 0.02 0.04 - - - - - - 0.01 0.05 0.074500 0.02 0.05 - - - - - - 0.01 0.05 0.074750 0.02 0.05 - - - - - - 0.02 0.05 0.085000 0.03 0.05 - - - - - - 0.02 0.06 0.085250 0.03 0.06 - - - - - - 0.02 0.06 0.095500 0.03 0.07 - - - - - - 0.02 0.06 0.105750 0.03 0.07 - - - - - - 0.02 0.07 0.116000 0.04 0.08 0.01 - - - 0.03 0.07 0.116250 0.04 0.08 0.01 0.01 0.03 0.07 0.126500 0.04 0.09 0.01 0.02 0.03 0.08 0.136750 0.05 0.10 0.01 0.03 0.03 0.08 0.147000 0.05 0.10 0.01 0.04 0.04 0.08 0.157250 0.06 0.11 0.01 0.05 0.04 0.09 0.167500 0.06 0.12 0.01 0.06 0.04 0.09 0.178000 0.07 0.13 0.02 0.09 0.05 0.10 0.198500 0.08 0.15 0.02 0.11 0.05 0.10 0.219000 0.09 0.16 0.04 0.14 0.06 0.11 0.249500 0.10 0.18 0.05 0.16 0.07 0.12 0.2610,000 0.11 0.20 0.06 0.19 0.07 0.12 0.2910,500 0.12 0.22 0.09 0.22 0.08 0.13 0.3111,000 0.14 0.24 0.11 0.25 0.09 0.14 0.34K-Series Packaged Heat Pump 15 and 20 Ton / Page 18

BLOWER DATACEILING DIFFUSER AIR RESISTANCE - in. w.g.Step-Down DiffuserFlush DiffuserAirRTD11-185RTD11-275VolumeFD11-185 FD11-275cfm1 Side/2 Ends All Ends &1 Side/2 Ends All Ends &2 Ends Open 2 Ends OpenOpen Sides OpenOpen Sides Open5000 .51 .44 .39 - - - - - - - - - .27 - - -5200 .56 .48 .42 - - - - - - - - - .30 - - -5400 .61 .52 .45 - - - - - - - - - .33 - - -5600 .66 .56 .48 - - - - - - - - - .36 - - -5800 .71 .59 .51 - - - - - - - - - .39 - - -6000 .76 .63 .55 .36 .31 .27 .42 .296200 .80 .68 .59 - - - - - - - - - .46 - - -6400 .86 .72 .63 - - - - - - - - - .50 - - -6500 - - - - - - - - - .42 .36 .31 - - - .346600 .92 .77 .67 - - - - - - - - - .54 - - -6800 .99 .83 .72 - - - - - - - - - .58 - - -7000 1.03 .87 .76 .49 .41 .36 .62 .407200 1.09 .92 .80 - - - - - - - - - .66 - - -7400 1.15 .97 .84 - - - - - - - - - .70 - - -7500 - - - - - - - - - .51 .46 .41 - - - .457600 1.20 1.02 .88 - - - - - - - - - .74 - - -8000 - - - - - - - - - .59 .49 .43 - - - .508500 - - - - - - - - - .69 .58 .50 - - - .579000 - - - - - - - - - .79 .67 .58 - - - .669500 - - - - - - - - - .89 .75 .65 - - - .7410,000 - - - - - - - - - 1.00 .84 .73 - - - .8110,500 - - - - - - - - - 1.10 .92 .80 - - - .8911,000 - - - - - - - - - 1.21 1.01 .88 - - - .96CEILING DIFFUSER AIR THROW DATAModelNo.1801 1Effective Throw Range - ft.Effective Throw Range - ft.Air VolumeModel Air VolumeRTD11-185 FD11-185RTD11-275 FD11-275cfmNo.cfmStep-Down FlushStep-Down Flush5600 39 - 49 28 - 377200 33 - 38 26 - 355800 42 - 51 29 - 38 7400 35 - 40 28 - 376000 44 - 54 40 - 50 7600 36 - 41 29 - 386200 45 - 55 42 - 51 7800 38 - 43 40 - 506400 46 - 55 43 - 52 2408000 39 - 44 42 - 516600 47 - 56 45 - 56 8200 41 - 46 43 - 528400 43 - 49 44 - 548600 44 - 50 46 - 578800 47 - 55 48 - 591Throw is the horizontal or vertical distance an airstream travels on leaving theoutletor diffuser before the maximum velocity is reduced to 50 ft. per minute. Foursides open.POWER EXHAUST FAN PERFORMANCEReturn Air System Static PressureAir Volume Exhaustedin. w.g.cfm0.00 86300.05 82100.10 77250.15 71100.20 64700.25 57900.30 50600.35 43000.40 35100.45 26900.50 1840K-Series Packaged Heat Pump 15 and 20 Ton / Page 19

ELECTRICAL/ELECTRIC HEAT DATA15 TON15 TON STANDARD EFFICIENCY KHA180S41Voltage - 60hz 208/230V - 3 Ph 460V - 3 Ph 575V - 3 PhCompressor 1 Rated Load Amps 25 12.2 9Locked Rotor Amps 164 100 78Compressor 2 Rated Load Amps 25 12.2 9Locked Rotor Amps 164 100 78Outdoor FanMotors (4)Power Exhaust(2) 0.33 HPFull Load Amps 2.4 1.3 1(total) (9.6) (5.2) (4)Full Load Amps 2.4 1.3 1(total) (4.8) (2.6) (2)Service Outlet 115V GFI (amps) 15 15 20Indoor BlowerMotor2MaximumOvercurrentProtection3MinimumCircuitAmpacityELECTRIC HEAT DATAHorsepower 3 5 7.5 3 5 7.5 3 5 7.5Full Load Amps 10.6 16.7 24.2 4.8 7.6 11 3.9 6.1 9Unit Only 100 100 110 45 50 50 35 35 40With (2) 0.33 HP 100 110 110 50 50 50 35 40 40Power ExhaustUnit Only 77 83 91 38 41 44 29 31 34With (2) 0.33 HP 82 88 95 41 43 47 31 33 36Power ExhaustElectric Heat Voltage 208V 240V 208V 240V 208V 240V 480V 480V 480V 600V 600V 600V2MaximumOvercurrentProtection3MinimumCircuitAmpacity2MaximumOvercurrentProtection3MinimumCircuitAmpacityUnit+Electric HeatUnit+Electric HeatUnit+Electric Heatand (2) 0.33 HPPower ExhaustUnit+Electric Heatand (2) 0.33 HPPower ExhaustELECTRICAL ACCESSORIES15 kW 125 125 125 150 150 150 70 70 70 50 50 6030 kW 175 175 175 175 175 200 90 90 90 70 70 7045 kW 200 225 200 225 225 250 110 110 125 90 90 9060 kW 225 225 225 250 225 250 110 125 125 90 90 10015 kW 116 122 122 128 130 136 61 63 67 47 49 5230 kW 155 167 161 173 169 181 83 86 89 65 67 7045 kW 194 212 200 218 208 226 106 108 112 83 85 8860 kW 202 221 208 227 216 235 110 113 116 86 89 9115 kW 125 150 150 150 150 150 70 70 70 50 60 6030 kW 175 175 175 200 175 200 90 90 100 70 70 8045 kW 200 225 225 225 225 250 110 125 125 90 90 9060 kW 225 250 225 250 225 250 125 125 125 90 100 10015 kW 121 127 127 133 134 140 63 66 69 49 51 5430 kW 160 172 166 178 174 186 86 88 92 67 69 7245 kW 199 217 205 223 213 231 108 111 114 85 87 9060 kW 207 226 213 232 220 240 113 116 119 88 91 93DisconnectUnit Only 54W86 54W86 54W86 54W86 54W86 54W86 54W85 54W85 54W85 54W85 54W85 54W85Unit + Power Exhaust 54W86 54W86 54W86 54W86 54W86 54W86 54W85 54W85 54W85 54W85 54W85 54W85Unit + Electric Heat 15 kW 54W86 54W86 54W86 54W86 54W86 54W86 54W85 54W85 54W85 54W85 54W85 54W85Unit + Electric Heat 30 kW 54W87 54W87 54W87 54W87 54W87 54W87 54W85 54W85 54W86 54W85 54W85 54W85Unit + Electric Heat 45 kW 54W87 54W87 54W87 54W87 54W87 54W87 54W86 54W86 54W86 54W85 54W85 54W86Unit + Electric Heat 60 kW 54W87 54W87 54W87 54W87 4 N/A4 N/A 54W86 54W86 54W86 54W86 54W86 54W86Unit + Power Exhaust + Elec. Heat 15 kW 54W86 54W86 54W86 54W86 54W86 54W86 54W85 54W85 54W85 54W85 54W85 54W85Unit + Power Exhaust + Elec. Heat 30 kW 54W87 54W87 54W87 54W87 54W87 54W87 54W85 54W86 54W86 54W85 54W85 54W85Unit + Power Exhaust + Elec. Heat 45 kW 54W87 54W87 54W87 54W87 54W87 54W87 54W86 54W86 54W86 54W85 54W85 54W86Unit + Power Exhaust + Elec. Heat 60 kW 54W87 54W87 54W87 54W87 4 N/A4 N/A 54W86 54W86 54W86 54W86 54W86 54W86NOTE - All units have a minimum Short Circuit Current Rating (SCCR) of 5000 amps.1Extremes of operating range are plus and minus 10% of line voltage.2HACR type breaker or fuse.3Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements.4Disconnect must be field furnished.K-Series Packaged Heat Pump 15 and 20 Ton / Page 20

ELECTRICAL/ELECTRIC HEAT DATA20 TON20 TON STANDARD EFFICIENCY KHA240S41Voltage - 60hz 208/230V - 3 Ph 460V - 3 Ph 575V - 3 PhCompressor 1 Rated Load Amps 30.1 16.7 12.2Locked Rotor Amps 225 114 80Compressor 2 Rated Load Amps 30.1 16.7 12.2Locked Rotor Amps 225 114 80Outdoor FanFull Load Amps 2.4 1.3 1Motors (4)(total) (9.6) (5.2) (4)Power Exhaust Full Load Amps 2.4 1.3 1(2) 0.33 HP(total) (4.8) (2.6) (2)Service Outlet 115V GFI (amps) 15 15 20Indoor BlowerHorsepower 5 7.5 10 5 7.5 10 5 7.5 10MotorFull Load Amps 16.7 24.2 30.8 7.6 11 14 6.1 9 112MaximumUnit Only 110 125 125 60 70 70 45 50 50OvercurrentProtectionWith (2) 0.33 HPPower Exhaust125 125 125 60 70 70 50 50 503MinimumCircuitAmpacityELECTRIC HEAT DATAUnit Only 95 102 109 51 54 57 38 41 43With (2) 0.33 HP 99 107 114 53 57 60 40 43 45Power ExhaustElectric Heat Voltage 208V 240V 208V 240V 208V 240V 480V 480V 480V 600V 600V 600V2MaximumUnit+ 15 kW 150 150 150 150 150 175 80 80 90 60 60 70Overcurrent Electric Heat 30 kW 175 200 200 200 200 200 100 100 110 80 80 80Protection45 kW 225 250 225 250 250 250 125 125 125 100 100 10060 kW 225 250 250 250 250 300 125 150 150 100 110 11090 kW 300 350 300 350 300 350 175 175 175 125 150 1503MinimumCircuitAmpacity2MaximumOvercurrentProtection3MinimumCircuitAmpacityUnit+Electric HeatUnit+Electric Heatand (2) 0.33 HPPower ExhaustUnit+Electric Heatand (2) 0.33 HPPower Exhaust15 kW 134 140 141 147 148 154 73 77 80 56 59 6130 kW 173 185 180 192 187 199 96 99 102 74 77 7945 kW 212 230 219 237 226 244 119 122 125 92 95 9760 kW 220 239 227 246 234 253 123 126 129 96 99 10190 kW 282 311 290 319 296 325 159 163 166 125 128 13015 kW 150 150 150 175 175 175 80 90 90 60 70 7030 kW 200 200 200 200 200 225 100 110 110 80 80 9045 kW 225 250 225 250 250 250 125 125 150 100 100 10060 kW 250 250 250 300 250 300 150 150 150 100 110 11090 kW 300 350 300 350 350 350 175 175 175 150 150 15015 kW 138 144 146 152 153 159 76 79 82 58 61 6330 kW 178 190 185 197 192 204 99 102 105 76 79 8145 kW 217 235 224 242 231 249 121 125 128 94 97 9960 kW 224 244 232 251 239 258 126 129 132 98 101 10390 kW 287 316 294 323 301 330 162 165 168 127 130 132ELECTRICAL ACCESSORIESDisconnectUnit Only 54W86 54W86 54W86 54W86 54W86 54W86 54W85 54W85 54W85 54W85 54W85 54W85Unit + Power Exhaust 54W86 54W86 54W86 54W86 54W86 54W86 54W85 54W85 54W85 54W85 54W85 54W85Unit + Electric Heat 15 kW 54W86 54W86 54W86 54W86 54W86 54W86 54W85 54W85 54W85 54W85 54W85 54W85Unit + Electric Heat 30 kW 54W87 54W87 54W87 54W87 54W87 54W87 54W86 54W86 54W86 54W85 54W85 54W85Unit + Electric Heat 45 kW 54W87 54W87 54W87 54W87 54W87 54W87 54W86 54W86 54W86 54W86 54W86 54W86Unit + Electric Heat 60 kW 4 N/A 4 N/A 4 N/A 4 N/A 4 N/A 4 N/A 54W86 54W86 54W86 54W86 54W86 54W86Unit + Electric Heat 90 kW 4 N/A 4 N/A 4 N/A 4 N/A 4 N/A 4 N/A 54W87 54W87 54W87 54W86 54W86 54W86Unit + Power Exhaust + Elec. Heat 15 kW 54W86 54W86 54W86 54W86 54W87 54W87 54W85 54W85 54W85 54W85 54W85 54W85Unit + Power Exhaust + Elec. Heat 30 kW 54W87 54W87 54W87 54W87 54W87 54W87 54W86 54W86 54W86 54W85 54W85 54W85Unit + Power Exhaust + Elec. Heat 45 kW 54W87 54W87 54W87 54W87 54W87 54W87 54W86 54W86 54W86 54W86 54W86 54W86Unit + Power Exhaust + Elec. Heat 60 kW 4 N/A 4 N/A 4 N/A 4 N/A 4 N/A 4 N/A 54W86 54W86 54W86 54W86 54W86 54W86Unit + Power Exhaust + Elec. Heat 90 kW 4 N/A 4 N/A 4 N/A 4 N/A 4 N/A 4 N/A 54W87 54W87 54W87 54W86 54W86 54W86NOTE - All units have a minimum Short Circuit Current Rating (SCCR) of 5000 amps.1Extremes of operating range are plus and minus 10% of line voltage.2HACR type breaker or fuse.3Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements.4Disconnect must be field furnished.K-Series Packaged Heat Pump 15 and 20 Ton / Page 21

ELECTRIC HEAT CAPACITIESVoltsInputkWInput15 kW 30 kW 45 kW 60 kW 90 kWBtuh No. ofOutput StageskWInputBtuh No. ofOutput StageskWInputBtuh No. ofOutput StageskWInputBtuh No. ofOutput StageskWInputBtuh No. ofOutput Stages208 11.3 38,600 1 22.5 76,800 1 33.8 115,300 2 45.0 153,600 2 67.6 230,700 2220 12.6 43,000 1 25.2 86,000 1 37.8 129,000 2 50.4 172,000 2 75.6 258,000 2230 13.8 47,100 1 27.5 93,900 1 41.3 141,000 2 55.1 188,000 2 82.7 282,200 2240 15.0 51,200 1 30.0 102,400 1 45.0 153,600 2 60.0 204,800 2 90.0 307,100 2440 12.6 43,000 1 25.2 86,000 1 37.8 129,000 2 50.4 172,000 2 75.6 258,000 2460 13.8 47,100 1 27.5 93,900 1 41.3 141,000 2 55.1 188,000 2 82.7 282,200 2480 15.0 51,200 1 30.0 102,400 1 45.0 153,600 2 60.0 204,800 2 90.0 307,100 2550 12.6 43,000 1 25.2 86,000 1 37.8 129,000 2 50.4 172,000 2 75.6 258,000 2575 13.8 47,100 1 27.5 93,900 1 41.3 141,000 2 55.1 188,000 2 82.7 282,200 2600 15.0 51,200 1 30.0 102,400 1 45.0 153,600 2 60.0 204,800 2 90.0 307,100 2UNIT CLEARANCES - INCHES (MM)Unit With EconomizerOUTDOORAIR HOODCDBA1Unit ClearanceA B C D TopClearancein. mm in. mm in. mm in. mmService Clearance 60 1524 36 914 36 914 66 1676Minimum Operation Clearance 45 1143 36 914 36 914 41 1041NOTE - Entire perimeter of unit base requires support when elevated above the mounting surface.1Service Clearance - Required for removal of serviceable parts.Minimum Operation Clearance - Required clearance for proper unit operation.UnobstructedK-Series Packaged Heat Pump 15 and 20 Ton / Page 22

OUTDOOR SOUND DATAUnitModel NumberOctave Band Linear Sound Power Levels dB, re 10 -12 Watts - Center Frequency - Hz125 250 500 1000 2000 4000 80001Sound RatingNumber (SRN)(dBA)KHA180 Cooling 75 81 87 89 86 81 69 93KHA180 Heating 76 81 87 89 87 81 70 93KHA240 Cooling 77 81 87 89 86 80 67 93KHA240 Heating 78 81 88 89 87 81 67 93NOTE - The octave sound power data does not include tonal corrections.1Sound Rating Number according to ARI Standard 370-2001 (includes pure tone penalty). “SRN” is the overall A-Weighted Sound Power Level, (LWA), dB (100 Hz to10,000 Hz).K-Series Packaged Heat Pump 15 and 20 Ton / Page 23

WEIGHT DATANetShippingModel Numberlbs. kg lbs. kg180 Base Unit 1950 885 2150 975180 Max. Unit 2270 1030 2470 1120240 Base Unit 2150 975 2350 1066240 Max. Unit 2480 1125 2680 1216Max. Unit - The unit with ALL INTERNAL OPTIONS Installed. (Economizer, Standard Static Power Exhaust Fans, Controls, etc.). Does not include accessories external to unit.OPTIONS / ACCESSORIESDescriptionShipping Weightlbs.kgECONOMIZER / OUTDOOR AIR / EXHAUSTEconomizerEconomizer Dampers 102 46Barometric Relief Dampers (downflow) 30 14Barometric Relief Dampers (horizontal) 20 9Outdoor Air DampersOutdoor Air Damper Section (downflow) - Automatic 52 24Outdoor Air Damper Section (downflow) - Manual 49 22Outdoor Air Damper Hood (downflow) 65 29Power Exhaust 62 28ELECTRIC HEAT15 kW 59 2730 kW 59 2745 kW 76 3460 kW 76 3490 kW 84 38Single Zone VAV Supply Fan SUPPLY AIR BLOWER OPTIONVariable Frequency Drive (VFD) and associated components 10 5ROOF CURBSHybrid Roof Curbs, Downflow8 in. height 75 3414 in. height 105 4818 in. height 125 5724 in. height 155 70Adjustable Pitch Curb, Downflow14 in. height 262 119Horizontal Roof Curbs, Standard26 in. height 420 19137 in. height 580 263CEILING DIFFUSERSStep-DownRTD11-185 392 178RTD11-275 403 183FlushFD11-185 289 131FD11-275 363 165TransitionsC1DIFF33C-1 80 36C1DIFF34C-1 75 34PACKAGINGLTL Packaging (less than truck load) 310 141K-Series Packaged Heat Pump 15 and 20 Ton / Page 24

DIMENSIONS - INCHES (MM)CORNER WEIGHTSCENTER OF GRAVITYModel No. AA BB CC DD EE FFlbs. kg lbs. kg lbs. kg lbs. kg in. mm in. mmKHA180 Std. Unit 385 182 466 220 602 284 497 235 59 1499 39-3/4 1010KHA180 Max. Unit 492 232 548 258 648 306 582 275 56-3/4 1441 41-3/4 1060KHA240 Std. Unit 423 199 497 235 665 314 565 267 58-1/4 1480 39 991KHA240 Max. Unit 536 253 580 274 709 335 655 309 56 1422 41 1041Std. Unit - The unit with NO INTERNAL OPTIONS.Max. Unit - The unit with ALL INTERNAL OPTIONS Installed. (Economizer, Standard Static Power Exhaust Fans, Controls, etc.). Does not include accessories externalto unit.AA4-1/4(108)BBALTERNATE (THRU THE BASE)CONDENSATE DRAIN LOCATION1-5/8 in. (41 mm) Diameter28-3/8(721)5-5/8 (143)12-3/8(314)12-3/8(314)60-1/2 (1537)15 (381) BOTTOM RETURNAIR OPENINGBOTTOM SUPPLY18 (457) AIR OPENINGS2828(711)(711)20 (508) 4-1/2 20 (508)(114)EECENTER OFGRAVITYFFDD(4)1024 (102)BOTTOM POWER ENTRY127 X 203 mm (5 X 8 in.)TOP VIEWCC90-1/8(2289)128-1/2(3264)CONDENSATEDRAIN5-3/8(137)51(1295)54-1/4(1378)1/2(13)29-1/4(743)SIDEELECTRICALINLETS91-1/8 (2315)BASE3-1/4(83)LIFTING HOLES(For RiggingFront and Back)129-1/2 (3289)BASEFORKLIFT SLOTS(Front and Left Sides Only)END VIEWSIDE VIEWK-Series Packaged Heat Pump 15 and 20 Ton / Page 25

ACCESSORY DIMENSIONS - INCHES (MM)OUTDOOR AIR HOOD DETAIL16(406)OUTDOOR AIR HOOD(Furnished with Economizer orOutdoor Air Damper)EXHAUST AIR HOOD(Furnished with OptionalDownflow BarometricRelief Dampers, Field Installed)OPTIONAL HORIZONTAL BAROMETRIC RELIEF DAMPERS WITH HOOD(Field installed in horizontal return air duct adjacent to unit)31-5/8 (803)1 29-1/2 (749)6-1/2(165)14-1/2(368)1 13(330)FRONT VIEWNOTE - Two furnished per order no.1 NOTE - Opening size required in return air duct.SIDE VIEW

ACCESSORY DIMENSIONS - INCHES (MM)HYBRID ROOF CURBS - DOUBLE DUCT OPENING82-5/8(2099)86-1/8(2188)21(533)17(432)16(406)8-1/4(210)RETURNOPENING61-1/2(1562)102(2591)SUPPLYOPENING61-1/2(1562)8 (203)14 (356)18 (457)24 (610)81-1/2(2070)98-1/2(2502)NOTE - Roof deck may be omitted within confines of curb.TYPICAL FLASHING DETAIL FOR ROOF CURBDETAIL ROOF CURBBASE BOTTOMPACKAGEDUNIT1-3/4(44)1/2 (13)FIBERGLASSINSULATION(Furnished)NAILER STRIP(Furnished)ROOF CURB(Extends around entireperimeter of unit)COUNTER FLASHING(Field Supplied)CANT STRIP(Field Supplied)ROOFINGMATERIAL8 (203)14 (356)18 (457)24 (610)FACTORY INSTALLEDPERIMETER WOODNAILER STRIPRIGID INSULATION(Field Supplied)1-3/4(44)

DIMENSIONS - ACCESSORIES - INCHES (MM)ADJUSTABLE PITCH CURB - DOUBLE DUCT OPENING82-5/8(2099)86-1/8(2188)21(533)17(432)16(406)1-3/4(44)8-1/4(210)RETURNOPENING61-1/2(1562)102-1/8(2594)98-1/2(2502)8-1/4(210)61-1/2(1562)SUPPLYOPENING14(356)FACTORY INSTALLEDPERIMETER WOODNAILER STRIPBOTTOM CURBASSEMBLYNOTE - Maximum slope pitch is 3/4 in. per 1 foot (19 mm per 305 mm)in any one direction.TYPICAL FLASHING DETAIL FOR ROOF CURBDETAIL ROOF CURBBASE BOTTOMPACKAGEDUNIT1-3/4(44)1/2 (13)FIBERGLASSINSULATION(Furnished)NAILER STRIP(Furnished)ROOF CURB(Extends around entireperimeter of unit)COUNTER FLASHING(Field Supplied)CANT STRIP(Field Supplied)ROOFINGMATERIAL14(356)FACTORY INSTALLEDPERIMETER WOODNAILER STRIPRIGID INSULATION(Field Supplied)1-3/4(44)K-Series Packaged Heat Pump 15 and 20 Ton / Page 28

ACCESSORY DIMENSIONS - INCHES (MM)ROOF CURBS WITH SUPPLY & RETURN AIR TRANSITIONS FOR CEILING DIFFUSERS69-1/4 (1759)RETURN TRANSITIONRETURN AIROPENINGBBSUPPLY AIROPENINGSA4-1/2(114)ASUPPLY TRANSITIONSUPPORTANGLE(Furnished withTransitions)54(1372)8 (203)2(51)26-1/2(673)TRANSITION DETAILA69-1/4(1759)1-1/2(38) Typ.3/4(19) Typ.BTOP VIEWTRANSITION OPENING SIZESModelA BNumber inch mm inch mmC1DIFF33C-1 18 457 36 914C1DIFF34C-1 24 610 48 1219K-Series Packaged Heat Pump 15 and 20 Ton / Page 29

ACCESSORY DIMENSIONS - INCHES (MM)HORIZONTAL ROOF CURBS − Requires Optional Horizontal Return Air Panel Kit1-13/16 (46)1-13/16(46)FrameOpening82-5/8(2099)102-1/8 (2594)1 26 (660)2 37 (940)98-1/2 (2502)1-13/16 (46)FrameOpeningSECTION A-A1 (25)NAILER STRIP(Furnished)2 (51)A1-13/16 (46)ANOTEC1CURB14C-1is designed for horizontal dischargewhen unit is mounted on a slab.C1CURB16C-1is designed for horizontal dischargewhen unit is mounted on a rooftop.PANEL TO COVER RETURN AIR OPENING IN BOTTOM OF UNIT(Furnished With Optional Horizontal Return Air Panel Kit)86-1/4(2191)98-1/2 (2502)54(1372)SUPPLY AIRTURNING VANE(Furnished)NOTE − Roof deck may be omitted within confines of curb.SIDE VIEW(Packaged Unit)1-13/16(46)TOP VIEW1 , 2 8-1/4 (210)102-1/8 (2594) 86-1/4 (2191)NAILER STRIP(Furnished)5-1/2 (140)1 26 (660)2 37 (940)75CURB SUPPLY (1905)AIR OPENINGWITH 1-1/2 IN. (38 MM) FLANGE14 (356)1 6-1/2 (165)2 17-1/2 (445)SUPPLY AIRTURNING VANE(Furnished)SUPPLYDUCTPANELS(Furnished)102-1/2 (2604)86-5/8 (2200)FRONT VIEWSIDE VIEW1 C1CURB14C-1 2 C1CURB16C-1HORIZONTAL SUPPLY AND RETURN AIR OPENINGSWITH HORIZONTAL ROOF CURB76-1/4 (1937)C1CURB14C-187-1/4 (2216)C1CURB16C-154-1/4(1378)22 (559)C1CURB14C-133 (838)C1CURB16C-1OUTDOORCOILSOPTIONAL RETURN AIR PANEL KIT(Required ForHorizontal Applications)15 (381)2 (51)HORIZONTAL SUPPLYAIR OPENING60-1/2 (1537)HORIZONTAL RETURNAIR OPENING75(1905) 14 (356)12-3/8(314)8-1/4(210)NOTE − Top of Roof Curb extends 4 inch (102 mm) insidebottom of unit base. See Typical flashing detail.26-1/4(667)OPTIONAL HORIZONTALROOF CURB(Required For HorizontalApplications)6-1/2 (165)C1CURB14C-117-1/2 (445)C1CURB16C-1K-Series Packaged Heat Pump 15 and 20 Ton / Page 30

ACCESSORY DIMENSIONS - INCHES (MM)COMBINATION CEILING SUPPLY AND RETURN DIFFUSERSSTEP-DOWN CEILING DIFFUSERFLUSH CEILING DIFFUSERHEGFGJDKHEGFGJDKCC2 (51)2 (51)NBABAMLModel Number RTD11-185 RTD11-275A in. 47-5/8 59-5/8mm 1210 1514B in. 47-5/8 59-5/8mm 1210 1514C in. 24-5/8 30-5/8mm 625 778D in. 45-1/2 57-1/2mm 1156 1461E in. 45-1/2 57-1/2mm 1156 1461F in. 4-1/2 4-1/2mm 114 114G in. 18 24mm 457 610H in. 2-1/2 2-1/2mm 64 64J in. 36 48mm 914 1219K in. 4-3/4 4-3/4mm 121 121L in. 45-1/2 57-1/2mm 1156 1461M in. 45-1/2 57-1/2mm 1156 1461N in. 10-1/8 11-1/8mm 257 283Duct Size in. 18 x 36 24 x 48mm 457 x 914 610 x 1219Model Number FD11-185 FD11-275A in. 47-5/8 59-5/8mm 1210 1514B in. 47-5/8 59-5/8mm 1210 1514C in. 29-1/4 35-1/4mm 743 895D in. 45 57mm 1143 1148E in. 45 57mm 1143 1448F in. 4-1/2 4-1/2mm 114 114G in. 18 24mm 457 610H in. 2-1/4 2-1/4mm 57 57J in. 36 48mm 914 1219K in. 4-1/2 4-1/2mm 114 114Duct Size in. 18 x 36 24 x 48mm 457 x 914 610 x 1219K-Series Packaged Heat Pump 15 and 20 Ton / Page 31

REVISIONSSectionOptions/AccessoriesDescriptionAdded new Combination Coil/Hail Guards.Visit us at www.allied-commercial.comFor the latest technical information, visit us at www.allied-commercial.comContact us at 1-800-448-5872NOTE - Due to Allied Commercial ongoing commitment to quality, Specifications, Ratings and Dimensions subject to change without notice and without incurring liability.Improper installation, adjustment, alteration, service or maintenance can cause property damage or personal injury.Installation and service must be performed by a qualified installer and servicing agency.©2015 Allied Air Enterprises LLC, a Lennox International Inc. Company