Download - All Fasteners

8D.013 Remgrit ® Hole SawTungsten Carbide particles metallurgically bonded to alloy steel back (high heat and abrasion resistant). Cutting edge is extremelylong-lasting on abrasive materials. “Grit-edge” is suitable for abrasive material (no teeth to dull or chip). Excellent for: ceramic tile,fibreglass, laminates, marble, composites and slate.ORDER CODE DIAMETER $/EACH8HSRG-016 16mm (5/8”) 18HSRG-019 19mm (3/4”) 18HSRG-020 20mm 18HSRG-022 22mm (7/8”) 18HSRG-025 25mm (1”) 18HSRG-029 29mm (1-1/8”) 18HSRG-032 32mm (1-1/4”) 18HSRG-035 35mm (1-3/8”) 18HSRG-038 38mm (1-1/2”) 18HSRG-044 44mm (1-3/4”) 18HSRG-048 48mm (1-7/8”) 18HSRG-051 51mm (2”) 18HSRG-054 54mm (2-1/8”) 18HSRG-057 57mm (2-1/4”) 18HSRG-060 60mm (2-3/8”) 18HSRG-064 64mm (2-1/2”) 18HSRG-070 70mm (2-3/4”) 18HSRG-076 76mm (3”) 1ORDER CODE DIAMETER $/EACH8HSRG-083 83mm (3-1/4”) 18HSRG-086 86mm (3-3/8”) 18HSRG-095 95mm (3-3/4”) 18HSRG-102 102mm (4”) 18HSRG-114 114mm (4-1/2”) 18: DRILLING & CUTTING8D.014 Remgrit ® Hole Saw KitORDER CODE CONTENTS OF KIT KIT TYPEQUANTITYOF SAWS$/KIT8HSRGK-9P20mm, 1-1/8” (29mm),1-3/8” (35mm), 1-1/2”(38mm), 1-3/4” (44mm),2” (51mm), 2 x Mandrels,Mandrel AdaptorTiler’s KitPlastic Case6 18D.015 Carbide Tipped Hole Saw MandrelORDER CODESHANK SIZE& TYPEFITS HOLESAW SIZESFITS CHUCKSIZE$/EACH8MA-5519CT 11/32” Hex 14mm - 30mm 3/8 - 1/2” 18MA-5546CT 11/32” Hex with Screw-In Pins 32mm - 152mm 3/8 - 1/2” 18D.016 Carbide Tipped Hole Saw Mandrel Pilot DrillORDER CODE DIAMETER X LENGTH FITS MANDREL SIZE (ORDER CODE) $/EACH8MPDC-06080 1/4” x 3-1/8” 8MA-5519CT, 8MA-5546CT 10Adelaide08 8396 27818.053© 2011 ALLFASTENERS