Download - All Fasteners

8E.087 814 Series Round Nose Bit Carbide TippedPersonalise your doors, drawer fronts, panels or any surface you choose with your own signature motif.CMT round nose bits in solid carbide or with carbide tipped flutes let you create engraving in any woodor wood product. We offer a complete selection of diameters and cutting depths so you can achievethe effects you want. Mounted on your router table, you can work up to 1-1/4” (31.7mm) in depth.ORDER CODECutting diameterX lengthCutterRadiusSHANKSIZE8CMT-814-032-11 3.2 x 9.5mm 1.6mm (1/16”) 1/4”8CMT-814-064-11 6.4 x 12.7mm 3.2mm (1/8”) 1/4”8CMT-814-095-11 9.5 x 6.4mm 4.75mm (3/16”) 1/4”8CMT-814-127-11 12.7 x 9.5mm 6.35mm (1/4”) 1/4”8CMT-814-160-11 15.8 x 9.5mm 7.9mm (5/16”) 1/4”8CMT-814-190-11 19.0 x 11.5mm 9.5mm (3/8”) 1/4”8CMT-814-564-11 6.4 x 15.9mm 3.2mm (1/8”) 1/2”8CMT-814-627-11 12.7 x 31.7mm 6.35mm (1/4”) 1/2”8CMT-814-660-11 15.8 x 31.7mm 7.9mm (5/16”) 1/2”8CMT-814-690-11 19.0 x 31.7mm 9.5mm (3/8”) 1/2”8CMT-814-754-11 25.4 x 31.7mm 12.7mm (1/2”) 1/2”$/EACH8: DRILLING & CUTTING8E.088 861 Series Corner Beading Bit Carbide Tipped + Ball Bearing GuideMill beautiful traditional beads and edge beads or turn old beads into molding with the new CMT cornerbeading bits with bearings. Carbide tipped cutting edges and coated with our non-stick trademarkorange TEFLON ® , these bits give you excellent results on corner beads. You will want to run the beadtwice to form a complete corner bead.ORDER CODECutting Overall Diameterx Cutter LengthCutterRadiusSHANKSIZE$/EACH8CMT-861-032-11 22.2 x 15.0mm 3.2 (1/8”)/6.4mm 1/4”8CMT-861-048-11 25.4 x 18.6mm 4.75 (3/16”)/9.5mm 1/4”8CMT-861-064-11 28.6 x 22.2mm 6.35 (1/4”)/12.7mm 1/4”8CMT-861-532-11 22.2 x 15.0mm 3.2 (1/8”)/6.4mm 1/2”8CMT-861-548-11 25.4 x 18.6mm 4.75 (3/16”)/9.5mm 1/2”8CMT-861-564-11 28.6 x 22.2mm 6.35 (1/4”)/12.7mm 1/2”8E.089 854 Series Bull Nose Bit Carbide TippedCMT bull nose bits give you beautiful finished edges on stair treads, window sills and shelves in oneclean cut. For an added touch, try using a cutter with a bead diameter wider than the stock thickness,CMT bull nose bits have bead diameters that range from 1/4” (6.4mm) to 1” (25.4mm) and all bits havecarbide edges, anti-kickback design and the trademark orange TEFLON ® non-stick coating.ORDER CODECutting Overall Diameterx Cutter LengthCutter Radius/Bead DiameterSHANKSIZE$/EACH8CMT-854-002-11 22.2 x 19.0mm 3.2 (1/8”)/6.4mm 1/4”8CMT-854-003-11 25.4 x 22.2mm 4.75 (3/16”)/9.5mm 1/4”8CMT-854-004-11 28.6 x 25.4mm 6.35 (1/4”)/12.7mm 1/4”8CMT-854-502-11 22.2 x 19.0mm 3.2 (1/8”)/6.4mm 1/2”8CMT-854-503-11 25.4 x 22.2mm 4.75 (3/16”)/9.5mm 1/2”8CMT-854-504-11 28.6 x 25.4mm 6.35 (1/4”)/12.7mm 1/2”8CMT-854-507-11 34.9 x 34.9mm 9.5 (3/8”)/19.0mm 1/2”8CMT-854-509-11 44.5 x 41.2mm 12.7 (1/2”)/25.4mm 1/2”Overnightor samedayinterstate?No problem!Adelaide08 8396 27818.077© 2011 ALLFASTENERS