Download - All Fasteners

8E.103 856 Series Multiprofile Bit Carbide Tipped + Ball Bearing GuideCut an endless number of classic profiles using the new CMT multi-profile bit. Vary the height of thecutter, the position of the fence and the number of passes, and you can obtain almost any moulding ordecorative edge imaginable. In addition, our CMT bits have our exclusive non stick TEFLON ® coatingbaked on to prevent residue accumulation that can cause burning, anti-kickback design feature, andcarbide tips that stay sharp longer. Use on tables equipped with a fence. Safety tips: To make smallmoulding shown below, cut the profile from very wide stock. Remove the excess material and work onthe bigger piece to give you easier control. Keep hands well clear of the bit when working.ORDER CODECutting OverallDiametercutterLENGTH8E.104 855 Series Window Sill/Finger Pull Bit Carbide TippedSHANKSIZE8CMT-856-801-11 38.1mm (1-1/2”) 28.0mm 1/2”8CMT-856-802-11 55.6mm (2-3/16”) 47.0mm 1/2”$/EACHThese profiles were originally intended for shaping the edges of window sills. Now the bits are alsoused for creating finger pulls on the edges of doors and drawers. These profiles are available in a smalland larger version for 16mm to 19mm or 25mm to 28mm material thicknesses. Recommended forrouter table use only.8: DRILLING & CUTTINGORDER CODECutting Overall DiameterX cutter lengthOutward Radius/Inward RadiusSHANKSIZE$/EACH8CMT-855-804-11 31.7 (1-1/4”) x 25.4mm 5.5/9.5mm 1/2”8CMT-855-805-11 38.1 (1-1/2”) x 35.0mm 9.5/12.7mm 1/2”8E.105 855 Series Window Sill/Finger Pull Bit Carbide Tipped+ Ball Bearing GuideThese profiles were originally intended for shaping the edges of window sills. Now the bits are alsoused for creating finger pulls on the edges of doors and drawers. These profiles are available in a smalland large version for 16mm to 19mm or 25mm to 28mm material thicknesses. These bits are availablewith top bearings for curved template work or without bearings for straight cuts against a fence.Recommended for router table use only.ORDER CODECutting Overall DiameterX cutter lengthOutward Radius/Inward RadiusSHANKSIZE$/EACH8CMT-855-804-11B 31.7 (1-1/4”) x 25.4mm 5.5/9.5mm 1/2”8CMT-855-805-11B 38.1 (1-1/2”) x 35.0mm 9.5/12.7mm 1/2”8E.106 855 Series Window Sash Bit 2 Piece Set Carbide TippedCMT designed this set so you can create window sashes that are as beautiful as they are functional.As an additional feature, the CMT window sash set will also mill perfectly joining 1-3/8” (35mm) rail andstile parts for custom made doors. Like all CMT quality bits, this set includes our anti-kickback designfeature and our trademark non-stick orange TEFLON ® coating. Made of Fatigue Proof ® steel withcarbide tipped cutting edges for longer life. Each set contains one 1-1/2” (38.1mm) bit and one 1-3/8”bit designed for cutting 1-3/8” (35mm) stock.ORDER CODECutting Overall DiameterOutward Radius/Inward RadiusSHANKSIZE$/EACH8CMT-855-801-11 35 - 38mm (1-1/2” - 1-3/8”) n/a 1/2”Adelaide08 8396 27818.081© 2011 ALLFASTENERS