Download - All Fasteners

8: DRILLING & CUTTING8E.033 821 Series Combination Trimmer Bit Carbide TippedWork to your highest standards with the CMT combination trimmer bit. Cut, trim and bevelall laminates without having to change bits. Get great results in straight or angle cuts. Mustbe used with an edge guide, separate bearing guide or fence.ORDER CODECUTTing DIAMETERX LENGTHCUTTER ANGLESHANKSIZE$/EACH8CMT-821-022-11 12.0 x 12.7mm 0º - 22º 1/4”8CMT-821-030-11 12.0 x 12.7mm 0º - 30º 1/4”8CMT-821-045-11 12.0 x 12.7mm 0º - 45º 1/4”8E.034 853 Series Flush & V-Groove Bit Carbide Tipped + Ball Bearing GuideThe ideal cabinetmaker’s bit! Specially designed to trim face frames flush with cabinetsides. The V-shaped cutter adds groove along the joint of the frame and side for an extradecorative effect that helps to hide the seam. Trims face frames up to 1” (25.4mm) thick.ORDER CODECUTTing DIAMETERX LENGTHOVERALLDIAMETERSHANKSIZE$/EACH8CMT-853-001-11 12.7 (1/2”) x 25.4mm 19.0mm 1/4”8CMT-853-501-11 12.7 (1/2”) x 25.4mm 19.0mm 1/2”8E.035 907 Series Combination Flush & Bevel Bit Carbide TippedUsing the CMT Combination Flush and Bevel Trim bit is the easiest and most precise way to putfinishes on laminates. To achieve a variety of angles no changing is required. Simply position the bitat the lowest cutting depth for perfect right angle cuts, or increase the height to create rounded offedges for angles up to 25º.ORDER CODECUTTing DIAMETERX LENGTHCUTTER ANGLESHANKSIZE$/EACH8CMT-907-210-11 21-26.5 x 15.0mm 0º - 25º 8mm8E.036 842/843 Series Trimmer Bit Solid CarbideAn economic version of our combination trimmer bits, these solid carbide bits give youquick clean straight or bevel edges. With radial relief cutting edges. you can make flush or7º bevel cuts. For more versatility, choose the combination flush-10º bit. Popular for theirlong life, they are particularly good for laminate work.ORDER CODECUTTing DIAMETERX LENGTHCUTTER ANGLESHANKSIZE$/EACH8CMT-842-095-11 6.35 x 9.5mm 0º 1/4”8CMT-843-063-11 6.35 x 6.35mm 7º 1/4”8CMT-843-064-11 6.35 x 9.5mm 0º - 10º 1/4”8E.037 816 Series Panel Pilot Bit Carbide Tipped + GuideHow much time do you end up spending making openings in paneling, gyprock, siding, doors or windows? Withthe CMT panel pilot bit, the job just got quicker. The point plunges smoothly and easily and the carbide edgecut clean and fast. All of this adds up to accurate cuts in less time and with less effort - great for trimming mica,veneer and other laminates. The 1/4” shank bit has a single cutter flute and the 1/2” shank bit hasORDER CODECUTTing DIAMETERX LENGTHOVERALLLENGTHSHANKSIZE$/EACH8CMT-816-064-11 6.35 (1/4”) x 19mm 64mm 1/4”8CMT-816-627-11 12.7 (1/2”) x 31.7mm 102mm 1/2”8.064MELBOURNE03 9330 0555SYDNEY1300 255 327© 2011 ALLFASTENERS