Download - All Fasteners

8E.078 903/904/905 Series Chamfer Bit Carbide TippedORDER CODECutting diameterX lengthcutterangleSHANKSIZE8CMT-903-240-11 24.0 x 14.0mm 15º 8mm8CMT-904-240-11 24.0 x 12.0mm 30º 8mm8CMT-905-240-11 25.0 x 8.0mm 45º 8mm8E.079 909/910 Series Bevel Trim & Chamfer Bit Carbide TippedCMT bevel and chamfer bits are ideal for putting a superior finish on laminates. These high qualitybits have two flutes for smother cutting and protected bearings so as not to damage the workpiece.The cutting depth of the bit can be varied to obtain precise borders and rounded edges on both softand hard woods. Perfect for making rounded edges on table legs and other easily damaged areas onfurniture pieces.ORDER CODECutting diameterX lengthcutterangleSHANKSIZE8CMT-909-260-11 26.0 x 8.5mm 30º 8mm8CMT-910-260-11 27.0 x 5.5mm 45º 8mm$/EACH$/EACH8: DRILLING & CUTTING8E.080 849 Series 60º Lettering Bit Carbide TippedDesigned specifically for routing signs, these CMT lettering bits have gracefully curving 60º cuttingedges, a 3.2mm radius 6 and 8mm flat bottom base. This profile allows you to create striking letteringeffects for sign making while eliminating undesirable chipping and splintering. The CMT 60º bit isperfect for making relief lettering - the flat base lets you quickly level off the area around the relief letter.By putting bevel edges on the raised characters you will reduce the possibility of splitting the letteringwhich often occurs when producing square relief effects.ORDER CODECutting diameterX lengthcutterangleSHANKSIZE$/EACH8CMT-849-001-11 25.4 (1”) x 19.0mm 60º 1/4”8CMT-849-501-11 28.5 (1-1/8”) x 19.0mm 60º 1/2”8E.081 849B Series 60º Lettering Bit Carbide Tipped +Top Bearing GuideTry our 60º lettering bit with top bearing guide to get even more precise decorative effects.ORDER CODECutting diameterX lengthcutter angle /bearing diameterSHANKSIZE$/EACH8CMT-849-501-11B 28.5 (1-1/8”) x 19mm 60º/28.5mm 1/2”8E.082 858 Series 60º Laser Point Bit Carbide TippedThis new bit lets you make grooves and incisions so delicate and precise that they look like they weremade with a laser. That’s why we decided to call this bit the CMT laser point bit. Improve your abilityas a sign maker by one of a kind effects with single run 30º bevel edges. Three super sharp cuttingedges and the perfectly balanced bit allow you to work with superior accuracy and precision with no riskof burning. Raise the bit and produce a delicate fine point incision or work the whole 1/2” (12.7mm)diameter to render bold highlighted lettering. Super strong steel shank and micrograin carbide cuttingedges guarantee long lasting performance.ORDER CODECutting diameterX lengthcutterangleSHANKSIZE$/EACH8CMT-858-001-11 12.7 (1/2”) x 11.0mm 60º 1/4”Adelaide08 8396 27818.075© 2011 ALLFASTENERS