Download - All Fasteners

8: DRILLING & CUTTING8E.055 818 Series Dovetail Bit Carbide Tipped + Top Bearing GuideORDER CODECutting Diameterx LengthOverall Length/Cutter AngleSHANKSIZE$/EACH8CMT-818-142-11B 14.2 (9/16”) x 9.5mm 12.7mm/14º 1/2”8E.056 837 Series Cove Bit Carbide Tipped + Ball Bearing GuideYou can make furniture, doors and drawer fronts that go from simple to elegant by giving them a finaltouch with a CMT cove bit. Put them together with a CMT round over bit, and construct perfectly fittingjoints that are ideal for drop leaf counter and table tops. These bits are made Fatigue Proof ® steel andhave carbide tipped cutting edges, anti-kickback design and CMT trademark bright orange TEFLON ®non-stick coating.ORDER CODECutter radius XOverall diameter X lengthBearingDiameterSHANKSIZE$/EACH8CMT-837-190-11 4.75 (3/16”) x 22.2 x 12.7mm 12.7mm 1/4”8CMT-837-222-11 6.35 (1/4”) x 25.4 x 12.7mm 12.7mm 1/4”8CMT-837-254-11 7.95 (5/16”) x 28.6 x 12.7mm 12.7mm 1/4”8CMT-837-286-11 9.5 (3/8”) x 31.7 x 12.7mm 12.7mm 1/4”8CMT-837-350-11 12.7 (1/2”) x 38.1 x 15.5mm 12.7mm 1/4”8CMT-837-690-11 4.75 (3/16”) x 22.2 x 12.7mm 12.7mm 1/2”8CMT-837-722-11 6.35 (1/4”) x 25.4 x 12.7mm 12.7mm 1/2”8CMT-837-754-11 7.95 (5/16”) x 28.6 x 12.7mm 12.7mm 1/2”8CMT-837-786-11 9.5 (3/8”) x 31.7 x 12.7mm 12.7mm 1/2”8CMT-837-850-11 12.7 (1/2”) x 38.1 x 15.5mm 12.7mm 1/2”8CMT-837-950-11 15.9 (5/8”) x 44.5 x 18.5mm 12.7mm 1/2”8CMT-837-951-11 19.0 (3/4”) x 50.7 x 22.2mm 12.7mm 1/2”CMT’s carbide tipped cove bits are a perfect match for the Roundover Bits on the previous page. That means they’re the idealway to produce rule joints for your drop leaf tables.8E.057 827 Series Ovolo Bit Carbide TippedCMT put the work capacity of several different bits all in one. The perfect bit for furniture makers, theCMT ovolo allows you to make beautiful bead work, edgework and veins. Use these bits on automatedrouter systems or with a fence to produce a wide variety of single and double bead profiles and roundovers, by simply adjusting the height or depth of the cut.ORDER CODECutter radius XlengthOVERALLDiameterSHANKSIZE$/EACH8CMT-827-050-11 5.0 x 12.0mm 21.0mm 1/4”8CMT-827-060-11 6.0 (15/64”) x 12.0mm 23.0mm 1/4”8CMT-827-095-11 9.5 (3/8”) x 13.8mm 31.7mm 1/4”8CMT-827-127-11 12.7 (1/2”) x 18.5mm 38.1mm 1/4”8CMT-827-560-11 6.0 (15/64”) x 12.0mm 23.0mm 1/2”8CMT-827-595-11 9.5 (3/8”) x 13.8mm 31.7mm 1/2”8CMT-827-627-11 12.7 (1/2”) x 18.5mm 38.1mm 1/2”8CMT-827-660-11 15.9 (5/8”) x 22.2mm 44.5mm 1/2”8CMT-827-690-11 19.0 (3/4”) x 24.5mm 50.7mm 1/2”8CMT-827-722-11 22.2 (7/8”) x 28.5mm 57.1mm 1/2”8CMT-827-754-11 25.4 (1”) x 33.3mm 63.5mm 1/2”We come to you -any site, anywhere:we’ll organiseon-site assistanceto solve yourfastening problems8.070MELBOURNE03 9330 0555SYDNEY1300 255 327© 2011 ALLFASTENERS