Download - All Fasteners

8E.112 855 Series Drawer Lock Bit Carbide TippedThe key to success when constructing quality drawers is in the quality of the drawer lock bit youuse. With CMT drawer lock bits you can make strong, perfectly fitting joints quickly and easily.Mill the drawer front with the inside face down flat on the work table. Mill the sides of the drawerwith the inside face placed vertical to the bit and fence and perpendicular to the table. These bitsare to be used on router tables only and are not to be used on hand held routers.ORDER CODECutting OverallDiameter8E.113 Router Bit BearingcutterlengthSHANKSIZE8CMT-855-002-11 31.7mm (1-1/4”) 12.7mm 1/4”8CMT-855-502-11 50.8mm (2”) 12.7mm 1/2”ORDER CODEoutsideDiameterinsidediameterbevel8CMT-791-002-00 9.5mm (3/8”) 4.76mm (3/16”) n/a8CMT-791-003-00 12.7mm (1/2”) 4.76mm (3/16”) n/a8CMT-791-004-00 19.0mm (3/4”) 6.35mm (1/4”) n/a8CMT-791-005-00 22.0mm 8.0mm n/a8CMT-791-006-00 16.0mm n/a n/a8CMT-791-008-00 21.0mm 5.0mm n/a8CMT-791-009-00 15.8mm (5/8”) 6.35mm (1/4”) n/a8CMT-791-010-00 12.7mm (1/2”) 6.35mm (1/4”) n/a8CMT-791-011-00 19.0mm (3/4”) 12.7mm (1/2”) n/a8CMT-791-014-00 28.5mm (1-1/8”) 4.76mm (3/16”) n/a8CMT-791-015-00 31.7mm (1-1/4”) 12.7mm (1/2”) n/a8CMT-791-016-00 34.9mm (1-3/8”) 4.76mm (3/16”) n/a8CMT-791-017-00 22.2mm (7/8”) 4.76mm (3/16”) n/a8CMT-791-018-00 15.8mm (5/8”) 4.76mm (3/16”) n/a8CMT-791-019-00 19.0mm (3/4”) 4.76mm (3/16”) n/a8CMT-791-020-00 38.1mm (1-1/2”) 12.7mm (1/2”) n/a8CMT-791-021-00 22.2mm (7/8”) 9.52mm (3/8”) n/a8CMT-791-025-00 15.8mm (5/8”) 8.00mm n/a8CMT-791-027-00 28.5mm (1-1/8”) 12.7mm (1/2”) n/a8CMT-791-028-00 37.0mm 12.0mm n/a8CMT-791-033-00 31.7mm (1-1/4”) 8.0mm n/a8CMT-791-041-00 19.0mm (3/4”) 4.76mm (3/16”) 10º8CMT-791-042-00 12.7mm (1/2”) 4.76mm (3/16”) 10º$/EACH$/EACH8: DRILLING & CUTTINGFull range of spare parts also available: Stop Collars, Shims, Spacers, Screws, Nuts, Washers, Shields & ColletReducers. Contact our sales team for more information.8E.114 102 Series Left-Hand Slot Mortising Bit High Carbon SteelZ2: 2 cutting edges. For use in left-hand rotation mortising machines - not for use in routers.ORDER CODECutting Diameterx lengthoveralllengthSHANKSIZE$/EACH8CMT-102-060-32 6 x 50mm 105mm 16mm8CMT-102-080-32 8 x 60mm 115mm 16mm8CMT-102-100-32 10 x 70mm 125mm 16mm8CMT-102-120-32 12 x 80mm 135mm 16mm8CMT-102-140-32 14 x 90mm 145mm 16mm8CMT-102-160-32 16 x 100mm 155mm 16mmSlot Mortising Sets also available - Contact our sales team for more information.Adelaide08 8396 27818.083© 2011 ALLFASTENERS