2000 Series Articulator and QuickMount Face-Bow ... - Whip Mix

Fig. 84Position the mandibular cast on the CR or Ml registration,verify cast is completely seated into the registration andcheck for stability. Secure three 3-inch sections of coathanger wire to maxillary and mandibular casts with stickywax or impression compound.Make sure the mandibular cast has been properly wettedprior to mounting.Fig. 85Hinge the lower frame into an open position and applymounting stone to the base of lower model and the lowermounting plate.Fig. 86Hinge the lower frame closed until the incisal guide pinmeets the incisal guide block. Make sure the condylarelements are seated flush against the posterior andsuperior walls of the condylar guides. Carefully hold thearticulator in this position until the mounting stone has set.28