2000 Series Articulator and QuickMount Face-Bow ... - Whip Mix

VI. Preparing the Articulator forMounting CastsFig. 134Many operators prefer to replace the plastic incisal guideblock with an adjustable metal table, such as the #2460Adjustable Guide Table (shown).Fig. 135To install the adjustable guide table, remove the #8526FPlastic Incisal Guide from the articulator. Slide theadjustable table into the thumb screw slot in the lowerframe of the articulator and tighten the thumb screw.Fig. 136Adjust the position of the adjustable guide table until thechiseled end of the incisal guide pin lies directly over thescribed line on the guide table.Note: Guide pin must be set at “0” on upper member.VII. Mounting the Maxillary CastFig. 137The indirect technique of mounting the maxillary cast willbe demonstrated. However, the direct mounting techniquemay also be used to mount the maxillary edentulous cast.The transfer assembly has been removed from the facebowand the support bar is placed into position.43