12.07.2015 Views

2000 Series Articulator and QuickMount Face-Bow ... - Whip Mix

2000 Series Articulator and QuickMount Face-Bow ... - Whip Mix

2000 Series Articulator and QuickMount Face-Bow ... - Whip Mix

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

OBTAINING FACE-BOW REGISTRATIONFig. 1Items needed for a <strong>Face</strong>-<strong>Bow</strong> Registration:<strong>Face</strong>-bow including nasion relator <strong>and</strong> face-bow fork(bite fork)Elastomeric registration materialAdhesive for elastomericI. Preparing <strong>Face</strong>-<strong>Bow</strong>Fig. 2Clean <strong>and</strong> properly disinfect the plastic ear pieces beforeeach use. If replacing them, make sure that the hole on theflat side of each is above the side arm <strong>and</strong> the plastic isseated until it touches the shoulder of the ear bow arm.Fig. 3A rubber-b<strong>and</strong> may be easily positioned on the face-bowto aid in its manipulation.Note the ability of the nasion relator assembly to moveleft <strong>and</strong> right along the cross bar <strong>and</strong> the face-bowcaliper design allowing the side arms to move equaldistances during the opening <strong>and</strong> closing motions.Fig. 4Center the nasion relator assembly on the cross bar ofthe face-bow.6

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!