NA-LUBE - King Industries, Inc.

NA-LUBE ® AW 6000 Series - Ashless Antiwear Additives Performance of the Unique NA-LUBE AW-6310NA-LUBE AW-6310 is an innovative extension of the other NA-LUBE AW products. It is aproprietary composition containing unique sulfur/phosphorus/nitrogen chemistries.NA-LUBE AW-6310 exhibits the following properties:Superior FZG performanceOutstanding rust inhibitionExcellent demulsificationGood hydrolytic stabilityGood thermal stabilityOutstanding synergy with the NA-LUBE AO SeriesExcellent solubility in a wide range of base oils, including some silicon fluidsNA-LUBE AW-6310 is used in screw compressor oils, railroad type non-mineral oil (Group V)greases, industrial gear oils, and automotive gear oils. It can also be used for formulating extremelyeffective ashless HF-2 type hydraulic fluids as shown below:TestsBase OilDemulsibility (ASTM D 1401, DIN 51 599)Oil-Water-EmulsionSeparation Time (Minutes)Steel Corrosion (ASTM D 665, DIN 51 585) A & B0.15% NA-LUBE AW-63100.20% NA-LUBE AO-2100.10% NA-LUBE AO-1300.03% K-CORR NF-20040-40-010PassAFNOR Wet Filtration (E 68691)Filterability Index 1.17Copper Corrosion (ASTM D 130, DIN 51 759)3 hours, 100°C3 hours, 135°CFZG A/8.3/90 (ASTM D 5182, DIN 51 354 Part 2)Damage Load Stage >12CM Thermal Stability (ASTM D 2070)CM Color Class: CopperSteelViscosity Change, %Acid Number Change (mg KOH/g)Total Sludge (mg/100 ml)Hydrolytic Stability (ASTM D 2619)Copper Loss (mg/cm²)Total Acidity of Water Layer (mg KOH)Copper Appearance (ASTM D 130)ISO VG 46 (Group II)1b1b530.510.0314.80NA-LUBE AW-6310 also exhibits very good performance in greases. The table below depicts theperformance of NA-LUBE AW-6310 in a synthetic lithium complex grease.Tests Without Additive NA-LUBE AW-63100.003.473bTreat Level, % — 2.0Base GreaseSynthetic Lithium ComplexTest Water5% Synthetic Sea WaterEMCOR Rust Test (ASTM D 6138, IP 220) 2,2 0,0Four Ball Wear (ASTM D 2266)1 hour, 75˚C, 40 kgf, 1200 rpmScar Diameter (mm) 0.73 0.48