NA-LUBE - King Industries, Inc.

K-CORR ® G SeriesRust Inhibitors for GreasesK-CORR ® G Series - Rust Inhibitors for GreaseThe K-CORR G Series was specifically designed for greases subjected to severe conditions.K-CORR G-1086A and K-CORR G-1270 are zinc-based. K-CORR G-1107 is ashless. All areformulated to enhance EP/AW properties and to minimize adverse effects on other greaseproperties, including water washout, water spray-off, penetration, and dropping point.PRODUCT Metal Content AttributesK-CORR G-1086A Zinc (9%) Antiwear synergist with first intention EP/AW additivesK-CORR G-1107 None - Ashless Metal free rust preventive with excellent antiwear propertiesK-CORR G-1270 Zinc (16.8%) Especially suitable to fulfill severe rust requirements K-CORR G-1086A PerformanceTestsWithoutAdditive1%G-1086AWithoutAdditive3%G-1086AWithoutAdditiveBase Grease Lithium 12-hydroxystearate (NLGI Number 2)Test Water 5% Synthetic Sea Water 100% Synthetic Sea WaterStatic Rust Test(ASTM D 5969) Fail Pass Fail Pass Fail3%G-1086A3% NaCI SolutionBorderlineFail4%G-1086AEMCOR Rust Test(ASTM D 6138, IP 220) 3,3 0,0 4,4 0,0 4,5 1,2 0,0 K-CORR G-1086A Performance - Three Week EMCORK-CORR G-1086A is also able to meet new and aggressive industry targets for grease performance.One such target requires a grease to provide “1” maximum EMCOR ratings (almost rust-free races)after a three-week EMCOR test. K-CORR G-1086A can provide rust-free results using the threeweek EMCOR test and 100% synthetic sea water.Tests4% K-CORR G-1086A4% K-CORR G-1086A2% NA-LUBE EP-52104% NA-LUBE ADTC0.05% K-CORR NF-200Base Grease Lithium 12-hydroxystearate (NLGI Number 2)Test Water100% Synthetic Sea WaterThree Week EMCOR Rust Test(ASTM D 6138, IP 220 - Modified) 0 0 K-CORR G-1107 PerformancePassTestsWithoutAdditive1%G-1107WithoutAdditive3%G-11075%G-1107Base Grease Lithium 12-hydroxystearate (NLGI Number 2)Test Water 5% Synthetic Sea Water 100% Synthetic Sea WaterStatic Rust Test(ASTM D 5969) Fail Pass Fail PassEMCOR Rust Test(ASTM D 6138, IP 220) 3,3 0,0 4,4 2,2Pass0,0