2010 Rail Manual - Dye Paintball

RAIL BOLTASSEMBLY AND MAINTENANCERAIL BOLTASSEMBLY AND MAINTENANCEMAINTENANCEThe basic maintenance for the RAIL BOLT is toclean all surfaces of dirt, broken paint orother debris, check for any wear andtear on the O-rings and changing themif needed, and finally applying a thincoat of DYE Slick Lube on allsurfaces. Before installing the RAILBOLT back to the RAIL marker checkthat the bolt moves freely without a lot offriction.Before installing the RAIL BOLT back into the RAIL make sure all pieces are threaded togethersnugly!If the RAIL BOLT is not kept clean and well lubed, you will either start seeing erratic velocity,leaks or over long period of time, physical damage to the RAIL BOLT components.Notice that it’s normal for a small amount of gas to come out through the back cap when theRAIL is fired. This gas is used for the Patented Boost forward technology of the RAIL.For troubleshooting leaks and other bolt problems, consult the troubleshooting section at the endof this manual.009511 1 1 1 12 5649RAIL BOLT O-RING LIST1 020 BN 702 017 BN 703 016 BN 704 015 BN 705 014 BN 7076 015 BN 907 009 BN 708 007 BN 709 014x2 BN 908318 19W W W . P R O T O P A I N T B A L L . C O MW W W . P R O T O P A I N T B A L L . C O M