User manual - teles

VIERLING
2.2.14 Finishing the installation procedure
» Mechanically attach the device (if necessary)
» Permanently install the antennas
Please read the following information:
9.4 Antennas
» Mechanically attach the connecting cable(s)
2.3 Getting further information
If you follow the steps outlined in the previous sections, your
ECOTEL ® should now be basically ready for operation.
However, you should be aware that ECOTEL ® offers a number of
additional functions. Please consult the corresponding help
sections to learn more about these functions and set them up as
required.
You can find additional information here:
6.4 Routing Table module
5.3 Strategy for the routing table
6.3 Gateway Configuration module
6.5.2 Firmware Tools: Time
6.5.3 Firmware Tools: Security Code
3.4 Additional functions
7 Making calls via ECOTEL
Page 38 Edition 4.1-EN – 20070730 ECOTEL ® VoIP/ISDN2-1/ISDN2-2