ATR620 - Logitron

26.1.1 Programming of starting set-point (if configured)Press Display Do3 Red display shows16 or , then(see configuration ofvisualization Par.19, 4 thdigit).Green display shows the“starting setpoint”.Otherwise go to point 5.4 Increase/decrease value ongreen display.At any time pressto quit the programmingmode and savemodified data..Enter starting setpoint(ex. Temperature atcycle start)16 The first two digits indicate number of step. Last digit shows entering thetime value/duration of step or entering setpoint value (ex.:temperature valueto reach within the programmed time)63