ATR620 - Logitron

38 Configuration tableDate:Installer:Notes:Model ATR620:Plant:P-01 General configurationP-02 Analog input AN1P-03 Analog input AN2P-04 ReservedP-05 Control output and source of setpointP-06 Lower limit setpoint 1 (-999/3000 digit)P-07 Upper limit setpoint 1 (-999/3000 digit)P-08 Lower limit range AN2 for V/mA(-999/3000digit)P-09 Lower limit range AN2 for V/mA (-999/3000digit)P-10 Alarms hysteresis (-999/3000)P-11 Configuration alarm no.1 (OUT)P-12 Configuration alarm no.2 (A1)P-13 Configuration alarm no.3 (A2)P-14 Setpoint alarm no.1(-999/3000 digit)P-15 Setpoint alarm no.2(-999/3000 digit)P-16 Setpoint alarm no.3(-999/3000 digit)P-17 Configuration digital input IN1P-18 Configuration digital input IN2P-19 Configuration Autotuning,step visualizationP-20 Power heating elements (0.0/999.9 KWatt)P-21 Waiting for step end (1/1440 min)P-22 Max gap at step end (1/200 digit)P-23 Cycle recoveryP-24 ReservedP-25 Filter analog inputs (1/20 medie)P-26 Offset calibration AN1 (-15.0/15.0 digit)P-27 Gain calibration AN1(-10.0%…+10.0%)P-28 End ON/OFF control (-999/3000digit)P-29 Reserved100