ATR620 - Logitron

More documents

Recommendations

Info

27.8 Manual control of output 21This functions allows to control/modify manually the commandoutput to exclude automatical control of process. The output isactivated as percentage 0 - 100% according to the time basisentered on parameter P-30 (cycle time).Set the controller tomode and follow the points below:Press Display Do1 Red display showsavailable options2 Increase/decrease untilis visualized3 Green display showspercentage of outputThecontroller activates theoutput.4 Visualize percentage valueof output 1 (cycling alsovalue of output 2 ifenabled).To modify percentagepress funtil reddisplay shows(or if twoprocess are enabled)and press tomodify value.To quit the function press21 Access to this function can be denied on P-01, 3 rd digit.71
28 Configuration for installer28.1 Modify numeric value of parameterThe following options are available :1. If all 4 digits are flashing, press to change theparameter.2. If all 4 digits are visualized but only one is flashing, pressto modify it and then to reach the following digit .28.2 Modify configuration parameterTo modify configuration parameters (see chap. 29), the controllermust be inmode.Press Display Do1 Red display shows availableoptions2 Increase/decrease until3 Green display shows4+and 1 st digit isflashing. Red display shows.Modify the flashing digit ongreen displayEnteris visualizedpassword72
Page 1 and 2: ATR620
Page 3 and 4: 20 IntroductionProgrammers ATR620 a
Page 5 and 6: 22.3 Software dataControl algorithm
Page 7 and 8: Power supply24/115/230Vac ±15% 50/
Page 9 and 10: 25 Displays and keys537496121181012
Page 11 and 12: 26 Programming and configurationThe
Page 14 and 15: 26.1.3 Programming of auxiliary out
Page 16 and 17: 27.2 Function “Fast advancement
Page 18 and 19: 27.5 Auto-tuningAuto-tuning 18 func
Page 22 and 23: Press Display Do5 Red display shows
Page 24 and 25: 29 List of configuration parameters
Page 26 and 27: 2 Type T (-250/400°C)3 Type R (-50
Page 28 and 29: 2 nd Digit -Operating zone for alar
Page 30 and 31: 0 Only process11 Only process 22 Ad
Page 32 and 33: P-38 Derivative time (0.0/999.9 sec
Page 34 and 35: 7 Yes Yes Yes3 rd Digit - Select ty
Page 36 and 37: General alarm (setpoint)Alarm can b
Page 38 and 39: 31.2 Recovery of interrupted cycle
Page 40 and 41: 32.2 Function MasterSoftware functi
Page 42 and 43: 33 Error messagesIn case that the p
Page 44 and 45: CD 3000SInputLoad673-30Vdc8CD 3000S
Page 46 and 47: OUTA1 A 2PIXSYSPRGMSTARTSTOPOKSUPPL
Page 48 and 49: O A1 A2U TPIXSYSO A1 A2U TPIXSYSOUT
Page 50 and 51: P-30 Max. time for impulse zone 1 (
Page 52 and 53: 103
Page 54: 105

ATR620 - Logitron

Create successful ePaper yourself

Delete template?

Save as template?