ATR620 - Logitron

1 8, O, 12 8, E, 13 8, N, 24 8, O, 25 8, E, 23 rd Digit – Enable Modbus delay0 Delay desabled.1 Delay enabled (15, 12, 9, 6, 3 ms ).4 th Digit – Enable software upgrade via serial input0 software upgrade via serial input desabled1 software upgrade via serial input enabledP-50 Slave address (0/99, 0 forMaster function).Select Modbus address of Slave. Enter 0 for Master.(see 32.2 ).P-51 Data visualization on displaySelect visualization for second display and which data can bevisualized pressing .1 st Digit – Visualization on second display0 Process 2(ex. temperature of second thermocouple)1 Setpoint programmed for step end(ex.temperature expected at end of running step)2 Control Setpoint(updated according to programmed gradient)3 Number of cycle in execution4 Time elapsed after cycle START (hours:minutes)5 Number of step in execution2 nd Digit – Visualization of data during the cycle pressing“Scroll” keyChronometer(hours:minutes)% output(0…100%)0 No No No1 Yes No No2 No Yes No3 Yes Yes No4 No No Yes5 Yes No Yes6 No Yes Yes84Step number(1…20 max)