SolarEdge Installation Guide for Three Phase Inverters - Solco Solar ...
SolarEdge Installation Guide for Three Phase Inverters - Solco Solar ...
SolarEdge Installation Guide for Three Phase Inverters - Solco Solar ...
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Power Optimizer Mechanical Specifications<strong><strong>Solar</strong>Edge</strong> <strong>Installation</strong> <strong>Guide</strong> <strong>for</strong> <strong>Three</strong> <strong>Phase</strong> <strong>Inverters</strong> – EU – MAN-01-00016-1.587Appendix CPower OptimizerMechanicalSpecificationsAbout This AppendixThis appendix presents the mechanical specifications <strong>for</strong> the <strong><strong>Solar</strong>Edge</strong>power optimizers.Use M8 screws and washers to secure the power optimizer units to theracking.NOTE:<strong><strong>Solar</strong>Edge</strong> does not provide the screws, nuts or washers because the requiredsizes and lengths vary <strong>for</strong> different racks.CAUTION:Be<strong>for</strong>e installing directly on the module or module frame, first consult the modulemanufacturer <strong>for</strong> in<strong>for</strong>mation about the proper positioning and its impact on themodule warranty.• Mark all mounting hole locations.• Each power optimizer must be attached to the rack using both mountingholes.• Drill the holes.CAUTION:Do not drill through the power optimizer or through the mounting holes. The strongvibrations created by the drill can damage the power optimizer.
Change language