2006 PRODUCT CATALOG

DUAL PROCEDURE KITS AND REMOTE PENDANTS
Dual Procedure Remote
Control Pendant
Contains voltage and wire feed
speed control knobs for remote
setting of procedures, and a
switch to select between two
procedures.
Order K1449-1 for LN-10,
DH-10
Dual Procedure Remote
Control Pendant Extension
Extension cable for K1449-1.
12 ft. (3.6m).
Order K1450-12
Dual Procedure Kit
Allows the use of two welding
procedures with one gun.
Procedures can be changed by
the flick of the switch — even
while welding.
Order K319 for LN-9 (all
models)
Order K302 for Extension
cable for K319
Dual Procedure/Memory
Panel
User memories work by copying
the weld procedure from
one of the six memories into
either the A or B procedure.
Weld procedures are saved
into the memories only when
the operator chooses.
Order K2360-1 for Power
Feed 10M
Recommended General Options
Wire Feeder Options
18-B
Dual Procedure Switch
Allows the use of two welding
procedures with one Lincoln
Magnum ® gun. 15 ft. (4.5m).
Order K683-3 for LN-10,
DH-10, STT-10, Power Feed
10M
STT Remote Output
Control
Remotely controls peak and
background current. 10 pin
remote control with 25 ft.
(7.6m) of cable.
Order K942-1 for STT-II
Foot Amptrol® Connector
Kit
Provides 25 ft. (7.6m) of
remote output control for TIG
welding. (6 pin plug connection).
Order K2320-1 for Power
Feed 10M
Dual Procedure Switch Kit
Easily mounts to gun using
convenient velcro straps to
allow welding operators to
select between two preset
welding procedures or modes.
Plugs into the gun trigger
connector on the wire feeder.
Order K2449-1 for Power
MIG 350MP
www.lincolnelectric.com