2006 PRODUCT CATALOG

Semiautomatic Wire Feeders
Welding Arm
Create a safe, uncluttered work environment where floor
space is used effectively with a Lincoln Series 6000
Welding Arm. Glide the arm effortlessly into position when
in use or swing it conveniently against a wall or beam for
safe, out-of-the-way storage. An 18" x 18" (457 x 457mm)
footprint ties up very little floor space. A welding arm
brings the welding controls to the operator to save time and
increase productivity. Designed to accommodate many of
our wire feeders, power sources and fume extraction
systems.
Processes
MIG, Pulsed, STT, Flux-Cored
Advantage Lincoln
• Can be mounted on the floor or on a steel mounting base
for portability in fabrication, auto repair shops and pipe
shops.
•Arm can be positioned above or below horizontal with
simple Clevis Pin adjustment.
• Extend the life of the wire feeder, fume extraction equipment,
welding cables and exhaust hoses by elevating
them to reduce wear and tear.
Arm Maximum
Product Product Length(1) Arm Load Capacity Weight
Name Number ft. (m) lbs. (kg) lbs. (kg) Rotation
Series 6000 K1778-1 13.5 (4.1) 150 (68) 375 (170) 180°
Welding Arm or 360°(2)
(1) Including wire feeder support.
(2) 360° after removing stop.
www.lincolnelectric.com
96
• Unique self-equalizing mechanism with counterbalance
springs maintains the height of the arm where the
operator positions it.
• Control cables, shielding gas hoses, etc. can be neatly
routed through the tubing of the arm for protection and
efficiency.
• Ships mounted to an 8 ft. (2.4m) tall steel upright post
with an 18 in. (0.45m) square base for bolting to the
floor.
• Three-year warranty on parts and labor.
Required Options
Single Electrode Conduit Liner Kit, Universal Feeder
Mounting Bracket, Control Cable and Weld Power Cable
Recommended General Options (Pgs 1-B– 33-B)
Mini Console, Wire Spindle Mounting Bracket, Dual Gas
Cylinder Holder Kit, Steel Mounting Base, Spindle Adapter
Kit
Recommended Power Source Options
Compatible with most Lincoln power sources.
Recommended Wire Feeders
Power Feed 10M, Power Feed 10M Dual, LF-72,
LF-74, LN-10, DH-10, STT-10, LN-742
Order
K1778-1 Series 6000 Welding Arm
Literature
E8.400