1961-64 Ford Pickup Truck - Classic Auto Air

Located behind the grill.Drill 9/32” hole in line with tube clamp andfasten to the bulkhead as shown.Locate the Liquid Hose; attach one end to the tube asshown.Route hose along bulkhead and attach to the LiquidTube from the receiver / drier. Attach using (2) #6 o-rings and a few drops of mineral oil.Locate (1) 3/8” dia hose clamp, (1) ½” dia. hoseclamp, and (2) #10 x ¾” hex head tek screws.Attach liquid tube and hose assembly to the bulkheadas shown.Locate the Suction Hose andattach end with service port tothe Compressor. Route the hoseback and along firewall acrossand down to #10 bulkheadfitting on the firewall.Attach using (2) #10 o-ring andfew drops of mineral oil.18