General Information Gates/Rohloff - Koga Signature

mountingMounting the Gates Carbon Drive Belt2The following steps describe how to mount the belt in a bike with already mounted sprockets.If your sprockets have not been mounted yet, please follow the instructions for Mounting frontand rear sprockets first. If you have any difficulties with mounting the belt, the video atwww.carbondrivesystems.com will help you.1. Open the frame break or ‘gate’ on theframe’s rear triangle. Since this breakmay vary from one manufacturer toanother, you’ll need to follow theinstructions of the manufacturerof your frame. In the followingillustrations the frame is opened atthe dropout.Insert the belt through the openingof the frame.2. Hang the belt over the bottombracket and lock the frame gate.3. Place the belt on the rear sprocketand mount the rear wheel into therear dropouts.www.carbondrivesystems.com11