General Information Gates/Rohloff - Koga Signature

More documents

Recommendations

Info

ContentCongratulations! 4For your safety 4Examples of improper handling 6Uncoiling the belt 7Examples of improper handling when mounting the drive belt 8Dismounting the rear wheel / Mounting the rear wheel 9Mounting the Gates Carbon Drive Belt 11Checking the belt tension / Checking the belt tension using the Tension Tester 15Checking the belt tension without the Tension Tester / Using the Snubber to keep the Gates Carbon Drive Belt from ratcheting 17Snubber assembly / Mounting the Snubber 18Removing the Snubbers / Mounting the Gates Carbon Drive Front Sprocket 20Mounting the Front Sprocket at the crank adapter 21Mounting the Gates Carbon Drive Hybrid Rear Sprocket M46x6 23Mounting the Rear Sprocket M46x6 to the Gates-Rohloff Carrier M46x6 24Retrofitting the rear sprocket to a Rohloff SPEEDHUB 26Retrofitting the rear sprocket to a Rohloff SPEEDHUB 500/14 with chain pinion 26Removing the Rear Sprocket M46x6 with Gates-Rohloff Carrier M46x6 from Rohloff SPEEDHUB 500/14 27Removing the Gates-Rohloff Carrier from the Rohloff SPEEDHUB 500/14 28Removing the Gates-Rohloff Carrier from the rear sprocket 29When does the Gates Carbon Drive Belt need to be replaced, when do the sprockets need to be replaced? 31Replacing the belt after it has been damaged 31Replacing the Sprockets when they have been damaged / Replacing belt and sprockets because of abrasion 32Anforderungen an den Fahrradrahmen zur Montage des Gates Carbon Drives / Possibilities for tensioning and adjustment 35Straightness and stiffness of the frame 36Comparing the gear ratio of a Rohloff SPEEDHUB 500/14 with a Gates Carbon Drive System to a derailleur 38Comparing the gear ratio of Rohloff SPEEDHUB 500/14 chain pinion to Gates Carbon Drive Sprocket 38Tables of distance traveled per crank revolution for Rohloff SPEEDHUB 500/14 with Gates Carbon Drive Sprockets 39Comparing the gear ratio of a derailleur system to the Rohloff SPEEDHUB 500/14 with Gates Carbon Drive Sprocket 40GATES CARBON DRIVE SYSTEM Product Warranty 422
1first steps• Congratulations!• For your safety• Examples of improper handling• Uncoiling the belt• Examples of improper handling when mounting the drive belt• Dismounting the rear wheel• Mounting the rear wheelwww.carbondrivesystems.com3
Page 4 and 5: first stepsCongratulations!Thank yo
Page 7: first steps1Mounting the tensioned
Page 11 and 12: mountingMounting the Gates Carbon D
Page 13 and 14: mounting2Illustration 3:Correct ali
Page 15 and 16: mountingChecking the belt tension2P
Page 17 and 18: mountingChecking the belt tension w
Page 19 and 20: mountingaxle. If the Snubber is loc
Page 21 and 22: mounting2Shim ring for bottombracke
Page 23 and 24: mountingMounting the Gates Carbon D
Page 25: mountingLubricate the inner thread
Page 28 and 29: mountingIllustration 8:Mounting the
Page 30 and 31: 3exchange• When does the Gates Ca
Page 32 and 33: exchangeIllustration 2:Wearing off
Page 34 and 35: 4forFrame builders• Frame require
Page 36 and 37: for Frame buildersIllustration 2:Ex
Page 39 and 40: atio overview19 Teeth rear 20 Teeth
Page 41 and 42: atio overviewSprocket-size combinat
Page 43: Find more information for Europe:Un

General Information Gates/Rohloff - Koga Signature

Create successful ePaper yourself

Delete template?

Save as template?