General Information Gates/Rohloff - Koga Signature

More documents

Recommendations

Info

for Frame buildersIllustration 2:Example for frameconstructionOpening of theFrameHorizontallyAdjustable DropoutsAxle Seat.Illustration 3:Example for frameconstruction: separationof the seat stayStraightness and stiffness of the frameFor the smooth operation of the Gates Carbon Drive System, the frame needs to bestraight and stiff. These requirements are specified in the Gates Technical Manual for FrameBuilders. Furthermore, the adjustable range of lengths between bottom bracket housingand rear axle should be between 16 and 30mm, to guarantee a sufficient tensioningfunction and the possibility of changing the gear ratio.Please note:You can find all information and the frame construction requirements for using the GatesCarbon Drive System in the Gates Technical Manual for Frame Builders Manual atwww.carbondrivesystems.com.36
5Gear RatioComparisum• Comparing the gear ratio of a Rohloff SPEEDHUB 500/14 with a GatesCarbon Drive System to a derailleur gear system• Comparing the gear ratio of a Rohloff SPEEDHUB 500/14 chain sprocketto a Gates Carbon Drive Sprocket• Tables of distance traveled per crank revolution for Rohloff SPEEDHUB500/14 with Gates Carbon Drive Sprockets• Comparing the gear ratio of a derailleur system to that of the RohloffSPEEDHUB 500/14 with Gates Carbon Drive Sprocketwww.carbondrivesystems.com37
Page 2 and 3: ContentCongratulations! 4For your s
Page 4 and 5: first stepsCongratulations!Thank yo
Page 7: first steps1Mounting the tensioned
Page 11 and 12: mountingMounting the Gates Carbon D
Page 13 and 14: mounting2Illustration 3:Correct ali
Page 15 and 16: mountingChecking the belt tension2P
Page 17 and 18: mountingChecking the belt tension w
Page 19 and 20: mountingaxle. If the Snubber is loc
Page 21 and 22: mounting2Shim ring for bottombracke
Page 23 and 24: mountingMounting the Gates Carbon D
Page 25: mountingLubricate the inner thread
Page 28 and 29: mountingIllustration 8:Mounting the
Page 30 and 31: 3exchange• When does the Gates Ca
Page 32 and 33: exchangeIllustration 2:Wearing off
Page 34 and 35: 4forFrame builders• Frame require
Page 39 and 40: atio overview19 Teeth rear 20 Teeth
Page 41 and 42: atio overviewSprocket-size combinat
Page 43: Find more information for Europe:Un

General Information Gates/Rohloff - Koga Signature

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?