Premium Security

5.8 Event setupFor event video recording, a lower menu like the one shown below can be setup. If ‘ENTER’ key, located inthe front of DVR, is pressed or if lower level menu is selected with the mouse, detailed items may be viewed.5.8.1 Eventchannel when an event occurs.CHECK : Setup whether to check and storeevents. [Application time setup] will be activatedonly if [Event application time] is setup as [Timeapplication ].MESSAGE [ON/OFF] : Select whether to displayevent items on screen with text.BUZZER : Select whether to sound the buzzerwhen an alarm is generated.SWITCH TO EVENT SCREEN : Setup whetherto convert the screen to the correspondingEVENT DISPLAY MIN TIME : Min. retention time for the screen when an event occurs(Amount of time to ignore an event if consecutive events are generated) is set within 0 ∼ 5seconds.EVENT DISPLAY MAX TIME : Max. retention time for the screen when an event occurs is setwithin 0 ∼ 99 seconds or allways. [Maintain current state] During setup, display the screen inwhich the event was generated continuously.TEXT MONITORING : Determine whether to save characters input from external devicesthrough RS-232.SENSOR TYPE : Setup the sensor type for the channel.(NO/NC)NO : Open type (Normal Open) sensor.NC : Closed type (Normal Close) sensor.[Max. retention time] cannot be setup with a smaller value than [Min.retention time].82