rotary press trailer system specification - The City of Titusville, Florida
rotary press trailer system specification - The City of Titusville, Florida
rotary press trailer system specification - The City of Titusville, Florida
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Fine Adjustment Sensitivity.Four (4) 1/4” FNPT Gauge Ports.11. Low Water Pressure Switch.Adjustable Set Point: 10-150 psi.1/2” NPT Aluminum.S.P.D.T. SWITCH.12. Air Pressure Switch Will Be “Gems” or Equal.Wetted Parts: Diaphragm Nitrile and Fitting Brass.Pressure: 3.5-100 psi.S.P.D.T. SWITCH.C. Provide an industrial duty differential <strong>press</strong>ure switch sensing loss <strong>of</strong> dilution water <strong>press</strong>ure rated NEMA 4X.On loss <strong>of</strong> dilution water <strong>press</strong>ure, the entire <strong>system</strong> shall shut-down and an alarm will be displayed on the HMItouch screen. Manual restart is required after fault is acknowledged.2.12 – Air Com<strong>press</strong>orA. Air Com<strong>press</strong>or Will Be An “Ingersoll Rand” or Equal.2 hp Single Stage.120V 60Hz.4.5 Gallon Capacity.B. Pneumatic Water Separator Will Be A “Parker” or Equal.1/4” NPT.Five (5) Micron Screen.C. Pneumatic Coalescing Filter Will Be A “Parker” or Equal.1/4” NPT.20 SCFM.Grade 6.D. Pneumatic Auto Blow Down62 Max SCFM At 100 psi.Aluminum Body and Bowl.1/2” NPT.Five (5) Micron.2.13 – Painting and CoatingA. Powder Coat Procedures For Fabricated Parts.1. Near White Sandblasted.2. Primer: Epoxy Powder Three (3) Mils.3. Finish Coat: Powder Coat Five (5) Mils.B. Painting Procedures For Purchased Parts.1. Primer: Bessler Primer.2. Finish Coat: Pitthane Epoxy Paint.C. Electro Polish Procedures For Stainless Steel Fabricated Parts.1. Washed with A Degreaser To Remove All Oil.Rotary Press Trailer System Specification Page 14 <strong>of</strong> 16
Change language