rotary press trailer system specification - The City of Titusville, Florida

More documents

Recommendations

Info

B. Equipment furnished under the section shall be fabricated, assembled, erected and delivered in full conformitywith the drawings, specifications, engineering data, instructions and recommendations of the equipment manufacturer,unless exceptions are noted and approved by the engineer prior to installation. Any request for exceptionsto any specification and/or stated requirements must be submitted and received a minimum of ten (10)working days prior to bid date.C. The Rotary Fan Press Trailer System shall be the product of a manufacturer regularly engaged in the manufacturingand supply of Rotary Fan Press Trailer Systems in the USA. All equipment shall be factory assembledand tested prior to shipment to ensure proper operation of all systems and be readied for field connections asshown on the project drawings. Any and all parts shall be suitable of the intended service conditions, in newcondition and assembled in accordance with the best engineering and shop practices.D. All of the equipment specified herein shall be off-loaded, properly stored, and placed in proper operating conditionby the installing contractor in accordance with the engineering data, instructions and recommendation ofthe manufacturer and best construction practices.1.02 – General System DescriptionsConsideration will be given only for pre-approved equipment meeting minimum system requirements. TheRotary Fan Press Trailer System shall be the model #RFP36D-TR as manufactured by Prime Solution, Inc.The contractor will be responsible for any changes necessary to the designs and drawings for any alternateequipment supplied. The complete dewatering system shall consist of one (1) Prime Rotary Fan Press,Ancillary Equipment and Interconnecting Wiring/Plumbing that at a minimum contain:‣ One (1) 20’ Trailer.‣ One (1) Positive Displacement Sludge Feed Pump with VFD Direct Gear Drive Motor.‣ One (1) Emulsion Polymer Feed/Blend System.‣ One (1) PLC Process Controls, Manual and Semi-Auto Operation.‣ One (1) Retention Sludge/Polymer Piping with Adjustable Mixer and Injection Ring.‣ One (1) Rotary Fan Press with Stainless Steel, Hard Chrome Plated Slotted Filer Screens.‣ One (1) Stainless Steel Folding Sludge Cake Conveyor‣ One (1) Air Compressor with Receiver.‣ One (1) Central NEMA 4X Electrical Control Panel with Touch Screen Operator Interface.‣ One (1) Standard Workmanship Warranty.‣ Spare Parts Readily Available Within The United States of America.Consideration for City approval of another manufacturer not listed above, Vendor shall be required to perform anon-site full scale pilot test, not exceeding thirty (30) days after the bid opening date, demonstrating that theequipment proposed by such Vendor and/or manufacturer is capable of meeting the minimum performance requirementsestablished herein.1.03 – Quality AssuranceA. All equipment specified under this section shall be furnished by a single Rotary Fan Press manufacturer locatedin the USA who is fully experienced, reputable and qualified in the production of the major equipment items tobe furnished. The manufacturer shall be responsible for the sludge dewatering system as noted in this specification.B. Consideration will be given only to products of manufacturers who can demonstrate that their equipment fullycomplies with all requirements of the specifications, warranties and contract documents. The Owner and/or EngineeringFirm, at all times, are the sole judge of “Exact Equivalent”, “Approved Alternate” and “Or Equal”designations to the specifications.Rotary Press Trailer System Specification Page 2 of 16
C. Within five (5) business days of the Engineer’s and/or Owners request, the manufacturer shall submit their writtenwarranty coverage for workmanship in meeting the requirements stated in this specification.D. All listed and required standards and/or codes shall be met as a minimum requirement and it shall be construedto mean the latest standard, code, specification or tentative specification adopted and published at the time ofadvertisement for bids.1.04 – PatentsThe manufacturer warrants that the use of this system and its equipment, in the process for which the system hasbeen expressly designed, will not infringe any U.S. or foreign patents. In the event of any claim of infringement,the manufacturer shall defend and indemnify the owner free from any liabilities associated with the use ofthe patented equipment or process.The manufacturer hereby grants to the owner, in perpetuity, a paid-up license to use any inventions covered bypatent or patents pending, owned or controlled by the manufacturer in the operation of the facility being constructedin conjunction with the equipment supplied under this contract, but without the right to grant sublicenses.1.05 – WarrantyA. The manufacturer shall warrant, in writing, that all equipment supplied by them shall be free from defects inmaterial and workmanship for a minimum period of twelve (12) months from the date of approved start-up, notto exceed eighteen (18) months from the date of delivery or two thousand-eighty (2,080) operating hours,whichever occurs first unless noted otherwise within this specification.B. The manufacturer’s warranty shall cover only the replacement and/or repair of defective parts if it is establishedto its satisfaction that damage has occurred under normal installation, operation and maintenance conditions andis due to material and/or manufacturing defects.C. All equipment, material and components manufactured by others used in the design of the dewatering systemshall have the same warranty afforded to Prime Solution, Inc. and is subject to and stipulated by the respectivemanufacturer’s warranty provided that the required maintenance has been performed by the Owner.D. Performance of the equipment shall be warranted from the manufacturer for meeting the listed material andworkmanship requirements as it relates to the operation/function of the equipment furnished in this specification.Conditions that affect the performance of the equipment furnished that are process/chemistry relatedand/or beyond the scope of the equipment supplied shall be the responsibility of others and not the equipmentmanufacturer.1.06 – Conditions of ServiceThe dewatering equipment approved shall be designed to adequately condition and dewater the listed feedsludge within a maximum of two (2) dewatering channels per Rotary Fan Press System.Type of sludge: ATAD Lime Water Sludge• Feed Solids (% TS) 2.5%-3.5% 1%-5%• Sludge Age (days) 40-60 1-90• Volatile Solids (% TVS) ~70% N/A• Operating Cycle (hrs./day/month) 24/7 3-5 days/month 24/7 12-20 days per monthRotary Press Trailer System Specification Page 3 of 16
Page 1: ROTARY PRESSTRAILER SYSTEM SPECIFIC
Page 5 and 6: C. Each copy of the manual shall be
Page 8 and 9: The following materials shall be pr
Page 10 and 11: C. All electrical components shall
Page 12 and 13: 2.08 - Trailerby the PLC and will t
Page 14 and 15: Fine Adjustment Sensitivity.Four (4
Page 16: Rotary Press Trailer System Specifi

rotary press trailer system specification - The City of Titusville, Florida

Create successful ePaper yourself

Delete template?

Save as template?