rotary press trailer system specification - The City of Titusville, Florida

B. Owner – Should the feed sludge be different than the listed data in Section 1.06 and the Ownerwishes to do performance retesting once the feed sludge is as listed in Section 1.06, it shall bethe Owner’s responsibility to make these arrangements with the Manufacturer within sixty (60)days. The Owner shall at its sole expense, pay the Manufacturer its standard rate, plus expensesfor the retest of the system.C. Chemical/Polymer Supplier – Should the chemistry/polymer provided be found not to producea stable, easily released floc of the feed sludge where either the dosage rate exceeds specifications,capture rates and/or sludge cake solids are lower than listed in the specifications, thisshall be the responsibility of the Owner and/or Chemical/Polymer Supplier. Should the Ownerrequest that a retest of the system be performed within sixty (60) days, the Owner shall at itssole expense pay the Manufacturer its standard rate, plus expenses for the retest of the system.D. Should the Owner, in its opinion, not require any retesting within sixty (60) days, it will automaticallyofficially accept the performance of the system.5. Manufactured shall do an onsite demonstration of the system on both the ATAD Material and water plantresiduals prior to bid.1.11 – Delivery, Storage and HandlingA. The Manufacturer will furnish and deliver all equipment, freight prepaid to Owner’s site (Mourning Dove WaterSupply Facility) located at:2836 Garden Street, Titusville, FL 32796B. The Owner shall be responsible for all off-loading and storage of the equipment.Rotary Press Trailer System Specification Page 6 of 16