rotary press trailer system specification - The City of Titusville, Florida

C. Within five (5) business days of the Engineer’s and/or Owners request, the manufacturer shall submit their writtenwarranty coverage for workmanship in meeting the requirements stated in this specification.D. All listed and required standards and/or codes shall be met as a minimum requirement and it shall be construedto mean the latest standard, code, specification or tentative specification adopted and published at the time ofadvertisement for bids.1.04 – PatentsThe manufacturer warrants that the use of this system and its equipment, in the process for which the system hasbeen expressly designed, will not infringe any U.S. or foreign patents. In the event of any claim of infringement,the manufacturer shall defend and indemnify the owner free from any liabilities associated with the use ofthe patented equipment or process.The manufacturer hereby grants to the owner, in perpetuity, a paid-up license to use any inventions covered bypatent or patents pending, owned or controlled by the manufacturer in the operation of the facility being constructedin conjunction with the equipment supplied under this contract, but without the right to grant sublicenses.1.05 – WarrantyA. The manufacturer shall warrant, in writing, that all equipment supplied by them shall be free from defects inmaterial and workmanship for a minimum period of twelve (12) months from the date of approved start-up, notto exceed eighteen (18) months from the date of delivery or two thousand-eighty (2,080) operating hours,whichever occurs first unless noted otherwise within this specification.B. The manufacturer’s warranty shall cover only the replacement and/or repair of defective parts if it is establishedto its satisfaction that damage has occurred under normal installation, operation and maintenance conditions andis due to material and/or manufacturing defects.C. All equipment, material and components manufactured by others used in the design of the dewatering systemshall have the same warranty afforded to Prime Solution, Inc. and is subject to and stipulated by the respectivemanufacturer’s warranty provided that the required maintenance has been performed by the Owner.D. Performance of the equipment shall be warranted from the manufacturer for meeting the listed material andworkmanship requirements as it relates to the operation/function of the equipment furnished in this specification.Conditions that affect the performance of the equipment furnished that are process/chemistry relatedand/or beyond the scope of the equipment supplied shall be the responsibility of others and not the equipmentmanufacturer.1.06 – Conditions of ServiceThe dewatering equipment approved shall be designed to adequately condition and dewater the listed feedsludge within a maximum of two (2) dewatering channels per Rotary Fan Press System.Type of sludge: ATAD Lime Water Sludge• Feed Solids (% TS) 2.5%-3.5% 1%-5%• Sludge Age (days) 40-60 1-90• Volatile Solids (% TVS) ~70% N/A• Operating Cycle (hrs./day/month) 24/7 3-5 days/month 24/7 12-20 days per monthRotary Press Trailer System Specification Page 3 of 16