PCM-9577

More documents

Recommendations

Info

Appendix B Installing PC/104 ModulesB.1 Installing PC/104 ModulesThe PCM-9577's PC/104 connectors give you the flexibility to attach PC/104 modules.Installing these modules on the PCM-9577 is quick and simple. The followingsteps show to mount the PC/104 modules:1. Remove the PCM-9577 from your system, paying particular attentionto the safety instructions already mentioned above.2. Make any jumper or link changes required to the CPU card now.Once the PC/104 module is mounted, you may have difficulty inaccessing these.3. Normal PC/104 modules have male connectors and mount directlyonto the main card. (Refer to the diagram on the following page.)4. Mount the PC/104 module onto the CPU card by pressing the modulefirmly but carefully onto the mounting connectors.5. Secure the PC/104 module onto the CPU card using the fourmounting spacers and screws.PCM-9577 User’s Manual 118
Figure B.1: PC/104 module mounting diagram119 Appendix B
Page 1 and 2:
PCM-9577Socket 370 Celeron/ Pentium
Page 3 and 4:
Packing ListBefore you begin instal
Page 5 and 6:
ContentsChapter 1 Introduction ....
Page 7 and 8:
4.2.3 Advanced BIOS Features setup
Page 9 and 10:
Appendix D System Assignments .....
Page 11 and 12:
CHAPTER1General InformationThis cha
Page 13 and 14:
1.2 Features• Socket 370 supports
Page 15 and 16:
• Power requirements:Max10A @ +5V
Page 17 and 18:
CHAPTER2InstallationThis chapter ex
Page 19 and 20:
Table 2.2: ConnectorsCN7 Peripheral
Page 21 and 22:
2.4 Locating ConnectorsPCM-9577 REV
Page 23 and 24:
2.6 Clear CMOS (JP4)Warning!To avoi
Page 25 and 26:
2.9 Solid State DiskThe PCM-9577 pr
Page 27 and 28:
2.13.2 Reset switch (J1)If you inst
Page 29 and 30:
2.17.2 CD audio input connector (CN
Page 31 and 32:
2.19.5 Panel type selection (S1)S1
Page 33 and 34:
Table 2.6: LAN controller power sel
Page 35 and 36:
* Reliability. Mini PCI Cards will
Page 37 and 38:
III. 3.3 Type II/III Form Factor2nd
Page 39 and 40:
CHAPTER3Software ConfigurationThis
Page 41 and 42:
Table 3.1: Connections to Toshiba L
Page 43 and 44:
Table 3.3: Connections to Toshiba L
Page 45 and 46:
4Chapter Ducks that Need Love!CHAPT
Page 47 and 48:
4.2 Award BIOS setupAward’s BIOS
Page 49 and 50:
4.2.3 Advanced BIOS Features setupB
Page 51 and 52:
4.2.5 Integrated PeripheralsChoosin
Page 53 and 54:
4.2.9 Frequency/Voltage ControlBy c
Page 55 and 56:
3. At the “Confirm Password” pr
Page 57 and 58:
CHAPTER5PCI SVGA SetupIntroductionI
Page 59 and 60:
5.1.4 Dual/Simultaneous DisplayThe
Page 61 and 62:
2. Choose the "Adapter" tab, then p
Page 63 and 64:
6. "S3 GraphicsTwister" appears und
Page 65 and 66:
2. Select “Adapter,” then “Ch
Page 67 and 68:
5. Insert the CD into the CD-ROM dr
Page 69 and 70:
5.2.3 Installation for Windows NTNo
Page 71 and 72:
3. Press the "Change..." button.61
Page 73 and 74:
6. Select the highlighted item, and
Page 75 and 76:
2. Choose the "Video Controller (VG
Page 77 and 78: 4. Choose "Display a list of..." ,
Page 79 and 80: 8. Press “Finish" to reboot.5.2.5
Page 81 and 82: 3. Choose “Video Controller (VGA
Page 83 and 84: 6. Choose “Don’t search. I will
Page 85 and 86: 10. Press “Finish" to reboot.5.3
Page 87 and 88: CHAPTER6Audio SetupThe PCM-9577 is
Page 89 and 90: 6.2.2 VIA Sound Blaster Installatio
Page 91 and 92: 3. In the following Add New Hardwar
Page 93 and 94: 7. In the following Add New Hardwar
Page 95 and 96: 11. In the Select Device window, se
Page 97 and 98: 6.3.3 Windows NT drivers1. Click "S
Page 99 and 100: 5. In the Add Unlisted or Updated D
Page 101 and 102: 3. Choose “Driver button, press
Page 103 and 104: 8. Press “Next” button9. Press
Page 105 and 106: CHAPTER7PCI Bus Ethernet InterfaceT
Page 107 and 108: 7.2.2 Installation for Windows 981.
Page 109 and 110: 6. a. Choose the " Intel 8255x base
Page 111 and 112: 2.101 Chapter 7
Page 113 and 114: 5.6.103 Chapter 7
Page 115 and 116: 9.7.2.4 Installation for Windows NT
Page 117 and 118: 4. Click “Have Disk.”5. a. Inse
Page 119 and 120: 7. Click “Next” to continue set
Page 121 and 122: 11. Click “Next” to start the n
Page 123 and 124: AppendixAProgramming theWatchdog Ti
Page 125 and 126: The following example shows how you
Page 127: AppendixBInstalling PC/104ModulesTh
Page 131 and 132: AppendixCPin AssignmentsThis append
Page 133 and 134: C.3 Ethernet 10/100/1000 BASE-T con
Page 135 and 136: C.6 Main Power Connector (CN9)Table
Page 137 and 138: C.8 Floppy Disk Drive Connector (CN
Page 139 and 140: Table C.9: PC/104 connectors (ISA1)
Page 141 and 142: C.11 Parallel Port Connector (CN17)
Page 143 and 144: C.14 USB Connector (CN1, CN2)Table
Page 145 and 146: C.18 TV (video) Out Connector (CN20
Page 147 and 148: C.20 Extended Flat Panel Display Co
Page 149 and 150: C.22 LVDS Connector (CN15)Table C.2
Page 151 and 152: C.25 CompactFlash Card Connector (C
Page 153 and 154: C.27 GPIO Connector (CN25)Table C.2
Page 155 and 156: Table C.28: Mini PCI Connector (CN2
Page 157 and 158: AppendixDSystem AssignmentsThis App
Page 159 and 160: D.2 1st MB memory mapTable D.2: 1st
Page 161 and 162: AppendixEOptional Extras for thePCM
Page 163 and 164: E.2 PCM-10586-5G00 Cable kit for PC
Page 165 and 166: AppendixFMechanical Drawings
Page 167 and 168: PCM-9577 REV.A1Figure F.2: PCM-9577
show all

PCM-9577

Create successful ePaper yourself

Delete template?

Save as template?