PCM-9577

2.20 TV-out interface (optional) (CN20)The PCM-9577 board provides optional TV-out via CN20. This consistsof a 5-pin wafer box header. Output supports composite video and S-video connectors via an optional cable kit (p/n: 1103050306). TV-outgenerators use both NTSC and PAL formats.To set up your video interface:1. Run the appropriate installation program located on the utility disk.That’s all there is to it.2.21 Ethernet configurationThe PCM-9577 is equipped with a high performance 32-bit PCI-busEthernet interface which is fully compliant with IEEE 802.3U 10/100Mbps CSMA/CD standards. It is supported by all major networkoperating systems.The medium type can be configured via the RSET8139.EXE programincluded on the utility disk. (See Chapter 3 for detailed information.)2.21.1 100Base-T connector (CN3, PCM-9577F)10/100Base-T connects to the PCM-9577F via an adapter cable to a 10-pin polarized header (CN3).2.21.2 1000Base-T connector (CN8, PCM-9577FG)10/100/1000 Base-T connects to the PCM-9577FG via an adapter cableto a 10-pin polarized header (CN8).2.21.3 Network bootThe Network Boot feature can be utilized by incorporating the BootROM image files for the appropriate network operating system. The BootROM BIOS files are included in the system BIOS, which is on the utilityCD disc.2.21.4 LAN controller power select (JP7)Table 2.6: LAN controller power select (JP7)5 V* Standby 5VPCM-9577 User’s Manual 22