Sauer-Danfoss series OTP steering columns

More documents

Recommendations

Info

OTP Steering Columns / OVPL, OVR Valve BlocksTechnical InformationValve Block OVPLTechnical Data(continued)The curve below shows pressure drop for backpressure valve with by-pass.InstallationConnection P in the valve block must be placed over the connection P in the steeringunit, so OVPL is provided with a positioning pin to fit the positioning hole in the steeringunit.The valve block is supplied inclusive of 2 mounting screws and 4 O-rings for buildingonto the steering unit.Tightening torque 65 ±5 N•m [575 ±44 lbf•in]. It is only allowed to mount OVPL blocks onsteering units with a flat port flange, no spot face is allowed.56 11015554 • Rev AB • May 2008
OTP Steering Columns / OVPL, OVR Valve BlocksTechnical InformationValve Block OVPLDimensionsOVPL, 5 portsEuropean version:P, T, L and R:G ½ w. spot face,15 mm (0.59 in) deepPP: G ¼, w. spot face,11,5 mm (0.45 in) deepX: 30,2 +0,2Y: 21,3 +/- 0,2OVPL, 4 ports (no PP)US version:P, T, L and R:¾ -16 UNF O-ring boss15 mm (0.59 in) deepX: 30,2 +0,2B: Positioning pinpremounted in OVPL11015554 • Rev AB • May 200857
Page 1 and 2:
Steering ColumnsType OTPSensorType
Page 3 and 4:
OTP Steering Columns / OVPL, OVR Va
Page 5 and 6: OTP Steering Columns / OVPL, OVR Va
Page 34: OTP Steering Columns / OVPL, OVR Va
Page 55: OTP Steering Columns / OVPL, OVR Va
show all

Sauer-Danfoss series OTP steering columns

Create successful ePaper yourself

Delete template?

Save as template?