Sauer-Danfoss series OTP steering columns

OTP Steering Columns / OVPL, OVR Valve BlocksTechnical InformationAngle Block OVRAngle Block OVRVersionOVR angle blocks are especially designed for applications in which pipes and/or hosesmust run parallel with the steering column axis, and where space is limited.The valve block can be flanged onto Sauer-Danfoss steering unit OSPB, OSPC, OSPD,OSPF, OSPQ and OSPL, which have no spot face around the ports.Use the angle block makes angle and swivel connections and pipe bends unneccessary.The OVR connections are positioned away from the steering wheel. (see dimensionspage 53)OVRF300626Code Numbers andWeightOVR in the table below has no valve functions incorporated.Angle blockCode numbersConnectionsEuropean versionP, T, L, R: G 1 /2S**WeightOVR 152-0201 2.0 [4.41]S** : Spot face around port connectionskg[lb]InstallationThe valve block is supplied inclusive of 2 mounting screws and 4 O-rings for buildingonto the steering unit.Tightening torque 65 ±5 N•m [575 ±44.3 lbf•in]. OVR blocks may only be mounted onsteering units with a flat port flange, (no spot facing).For OVR blocks with other thread ore kind of valves mounted, please contact the Sauer-Danfoss Sales organisation.11015554 • Rev AB • May 200859