grippers & rack and pinion rotary actuators - Industrial and Bearing ...

SWITCHESDC HALL-EFFECTSWITCHESRefer to next page for mounting data.NOTE: Cable is UNSHIELDED.HALL-EFFECT SOURCINGSWITCH WIRING DIAGRAMHALL-EFFECTSOURCINGSWITCHHALL-EFFECTSINKINGSWITCHBROWN(+)BLACKBLUE(-)BROWN(+)BLACKBLUE(-)(+)(-)(+)(-)LOADHALL-EFFECT SINKINGSWITCH WIRING DIAGRAMLOADSPECIFICATIONSINPUTVOLTAGEOUTPUTOUTPUTONOFFRATINGTRIP POINTTRIP POINTOPERATINGTEMP.OPERATINGSPEEDINDICATORCABLEPERFORMANCE DATADC HALL-EFFECT SWITCH SPECIFICATIONSHALL-EFFECTSOURCINGHALL-EFFECT SINKING5 to 25 Vdc5 to 25 VdcOpencollector transistor switchOpen collector transistor switch25Vdc, 200mA dc25 Vdc, 200mA dc135Gauss maximum135 Gauss maximum20Gauss minimum20 Gauss minimum0 ° F (-18° C) to 150° F (66° C) 0° F (-18° C) to 150° F (66° C)< 5mSec.< 5mSec.Red LED lit when sensor isactivated5 meter with PVC jacket2m or 5m Quick-Disconnect withPVC jacketRed LED lit when sensor isactivated5 meter with PVC jacket2m or 5m Quick-Disconnect withPVC jacketAC TRIAC REEDSWITCHESSee next page for mounting dimensions.NOTE: Cable is UNSHIELDED. Reedswitches can be used to operate relaysand solenoids if a protection circuit isused and if current, wattage and voltagelimits are observed. (Call the factory formore information.)NOT AVAILABLE FOR ROTARYACTUATORS120VacMax.BLUETRIAC REED SWITCHWIRING DIAGRAMMOVTRIACSWITCHAC COM LOADBROWNINPUTPERFORMANCEDATALOAD CURENT (mA)TEMPERATURE vs CURRENT1000800600400200TRIAC00 20 40 60 80 100 120 140 160OPERATING TEMPERATURE (°F)* Data available from manufacturer.AC TRIAC REED SWITCH SPECIFICATIONSSPECIFICATIONSCONTACTSINPUTVOLTAGEFREQUENCYCONTINUOUSCURRENTPEAK SURGECURRENTOPERATINGTEMP.INDICATORLIFEEXPECTANCY*CABLETRIAC SWITCHSingle-pole, single-throw,normally open120Vac maximum47 - 63 Hz1 Amp at 86° F (30° C);0.5 Amp at 140° F (60° C)-40° F10 Amp(-40° C) to(70° C)None158° FUp to 200,000,000 cycles(depending on loadcurrent,duty cycle andenvironmental conditions)5 meter with PVC jacket2m or 5m Quick-Disconnectwith PVC jacket32