grippers & rack and pinion rotary actuators - Industrial and Bearing ...

THREAD FFFESYM. CMOUNTING LEND WITH BUMPERDATAGZVVNOTE: The scored face of the switch indicates the sensing surface and must face toward the magnet.ABGP_038 GP_063 GP_100, GP_150GP_200, GP_300SENSINGSURFACECIRCUIT BOARD WRAPPED IN HEAT SHRINKHALL-EFFECTSENSORONLYABSENSINGSURFACECIRCUIT BOARD WRAPPED IN HEAT SHRINKHALL-EFFECTSENSORONLYSENSINGSURFACEBACMODEL BORE A B CGP_038 .375 .34 .50 –GP_063 .625 .22 .50 –GP_100 1.000 .38 .50 1.25GP_150 1.500 .38 .50 1.25GP_200 2.000 .35 .50 1.25GP_300 3.000 .47 .50 1.25Above dimensions in inchesMODEL BORE A B CGP_038 10 8.61 12.70 –GP_063 16 5.64 12.70 –GP_100 25 9.60 12.70 31.75GP_150 40 9.60 12.70 31.75GP_200 50 8.89 12.70 31.75GP_300 80 11.81 12.70 31.75Above dimensions in millimetersRA075, RA100, RA125HALL-EFFECT SENSOR ONLY CIRCUIT BOARD WRAPPED INHEAT SHRINKBARA075RA100RA125SENSINGSURFACEMODEL BORE A BRA075 0.75 .34 .50RA100 1.00 .34 .50RA125 1.25 .32 .50Above dimensions in inchesSIDE VIEWEND VIEWMODEL BORE A BRA075 20 8.51 12.70RA100 25 8.51 12.70RA125 32 8.18 12.70Above dimensions in millimetersQUICK-DISCONNECT COUPLERSQuick-disconnect couplers are available for all switches in 2m and 5m lengths.These couplers allow switches to be removed quickly and easily. Switch includesone male-end coupler (hard wired to switch) and one female-end coupler withadditional cable for in-line splice. Replacement switch with hard-wired male-endconnector is available as a service part (see page 40 of this catalog).NOTE: Quick-disconnect coupler is positioned 6" from the sensor.33