Eaton Axle and Brake Service Manual. 2-Speed and Double ...

REMOVAL / DISASSEMBLYDrive AxleOverhaulAssemble Wheel DifferentialNOTE: Lubricate internal parts with gearlube during reassembly.1. Press bearing cones on support cases(see illustration).CAUTION: To prevent bearing conedamage, use suitable sleeve that onlycontacts the inner race of the cone.2. Position high-speed clutch plate withchamfered end of the clutch teeth towardidler pinions. Press clutch plate on case(see illustrations below).CLUTCH PLATEINSTALLATIONr 1I I Clutch.:. .:. . . . . . . . . . . . . . . . . .Section 3CAUTION: It is important that the ends of the dowel pins are recessed 1/8" below surface ofthe clutch plate. If pins extend beyond plate surface, press pins to proper depth. Don't pressthem in too far.18