Manual IK-CBG-937 - Vaag.es

Manually level settingTo set manually the level.- Select the desired input or cluster.Example : setting the level of BI-II- Turn the button to choose the Select Filter mode.Select FilterThe LED is green.- Push the rotary button to enter the selected mode.Select FilterThe LED is now RED colored.- Turn the button to select BI-II.I-II III VHF-UHFLED is activated1 2 3 4 5 6 7 8 9 10UHF Clusters- Push the button to confirm.Select FilterThe LED is green.- Turn the button to select the Manual Level mode.Manual LevelThe LED is green.- Push the rotary button to enter the selected mode.Manual LevelThe LED is now RED colored.- Turn the button to set manually the level, variable from 20 dB to 0 dB (30 dB to 0 dB for clusters).- Push the button to confirm.Manual LevelThe LED is green.Repeat this section to set all levels31