analogue signal conditioning waveseries·microseries·mcz-series

Power suppliesWAVEPOWERThe WAVEPOWER power supply isspecialy designed for use withWAVESERIES Analogue signalconditions. The modules could besupplied by using the pluggablecross connection, which reducesthe installation time. Especially indecentralized Automation systemesthe required place will be reduced.CP-SNT 12WApprovals:% a rDiagramm/Schematic circuit diagram– secondary through plug-in jumpers ZQVcross-connectable to other WAVE-modulesOrdering dataOutput voltage/max. currentTypePart No.CP-SNT 12 W24 Vdc / 0.5 A 9918840024Input voltageMinimumtypicalMaximumInput currentat 115 Vac(Mean value; serves asat 230 Vacreference only)at 125 Vdcat 250 VdcInput protectionFuseOvervoltage protectionSwitching frequencyEfficiency at max. loadMax. rippleRegulationLoad (10-100% load)at input voltageOverload protectionMax. capacity at outputHold timeat 115 Vac(Max. output current following input loss)at 230 VacStorage temperatureOperating temperatureHumidityOperating temperatureStorage temperatureGalvanic isolationInput-outputInput/output to mounting railInput to earthOutput to earthWire diameterDimensions L/H/W (mm)WeightMounts on mounting rail85 Vac, 120 Vdc115-230 Vac ±10%, 50/60 Hz265 Vac, 300 Vdc260 mA RMS ± 20%180 mA RMS ± 20%125 mA ± 20%65 mA ± 20%2 A slow fuse (internal)Varistor100 kHz PWM80%0.1% RMS0.6%0.2% 85 Vac - 265 Vac onOvervoltage switch-off with automatic reset plusthermal switch-off8 000 µF30 ms80 ms-40 ºC...+85 ºC-20 ºC...+50 ºC max. full rated loadDerating: 33% at 60 °C20 - 85% RH without condensation20 - 90% RH3 kV RMS4 kV RMS1.5 kV RMS500 V RMS26-12 AWG (0.1-4.0 mm 2 )90 x 18 x 112.5110 gTS 35Approvals/certificationsCE, UL, CSA57