Glenair Mighty Mouse Connectors Catalog - Interstate Connecting ...

CordsetsSeries 80 Mighty MouseASAP Cordsets for High Speed Serial DataIntroductionABCE100BASE-T Cordsetwith 4 Pin Series 800 ConnectorUpgrade commercial high speed serialinterconnects to mil-spec performance.Glenair’s ASAP “Mighty Mouse” cordsetsare available for 100BASE-T, GigabitEthernet, IEE 1394 and USB 2.0 applications.These cordsets combine aerospacegradedata cables with Series 80 “MightyMouse” harsh environment connectorsfor maximum performance and minimumsize.FEP jackets meet FAA flammabilityrequirements. Or, choose low smoke /zero halogen polyurethane jackets formass transit or shipboard applications.Three strain relief options – Standardovermolded cables offer excellent strainreliefand cable sealing.Or, choose heatshrinkboots for smallest form factor. If repairabilityand ruggedness are important, choosemachined aluminum EMI backshells.FGKJKThree reasons to specifyGlenair Series 80 cordsetsSimplified Ordering: No1 need to buy cable, connectors,termination tools and strain reliefs.2Guaranteed Performance:All cordsets are 100%electrically tested.3Faster Delivery: Cable andconnector components are instock.how to order cordsetsStep 1: Select the Connector SeriesTable1 lists the five types of Series 80 connectors. For more information on selectinga connector, please refer to the connector selection chart on the following page. Thissection does not contain ordering information for series 802 “Aqua Mouse” cordsets.Please contact Glenair for information on hazardous environment high pressurecables for the 802 Series.Step 2: Select the CableTable 2 contains specifications for standard data cables. The cable type alsodetermines the connector layout. 4 pin connectors are used for 4 wire cables,and 10 pin connectors are used for 8 wire cables.Step 3: Select a Cable JacketTable 3 shows available jacket options. Choose FEP flourocarbon jacketsfor airframe and avionics applications, or choose low smoke/zero halogenpolyurethane jackets for soldier systems, vehicles, and transit systems.Step 4: Select a Cable-To-Connector InterfaceTable 3 provides three ways to attach the cable to the connector:1. Polyamide boot, overmolded with flexible strain relief2. Aluminum backshell, shielded, watertight and removable3. Heat-shrink boot, low smoke/ zero halogenStep 5: Select a Connector ConfigurationTable 1 shows connector codes for specifying plug versus receptacle and pinversus socket contacts. Add a plating code, keying option and length.Dimensions in inches (millimeters) and are subject to change without notice.© 2010 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com K-2 E-Mail: sales@glenair.com01-JANUARY-2010