Glenair Mighty Mouse Connectors Catalog - Interstate Connecting ...

ReferenceSeries 80 Mighty Mouse Technical ReferenceComplete Product SpecificationADESCRIPTION REQUIREMENT PROCEDUREBCD21 day humidity (dampheat, long term)Thermal shockNo deterioration which will adversely affectthe connector. Following the drying period,connectors shall meet 100 megohmsminimum, contact resistance, shell-to-shellresistance, DWV, mating and unmatingrequirements.No mechanical damage or loosening ofparts. Following thermal shock, connectorshall meet contact resistance, DWV,insulation resistance and shell-to-shellresistance requirements.EIA-364-31 Condition C Method IIIEC-60512-11-3 Severity C90-95% RH40° CApply 100 volts DC during test. 4 hoursdrying time at ambient temperatureprior to final measurements.EIA-364-32 Test Condition IVIEC-60512-11-45 cycles consisting of -65° C 30minutes, +25° C 5 minutes max., +150°C 30 minutes, +25° C 5 minutes max.EFGCorrosion (salt mist)No exposure of base metal. Connectorsshall meet DWV and contact resistancerequirements following the test.EIA-364-26IEC 60512-11-65% salt solution35° CUnmated connectorsCode C: 48 hoursCode M: 48hoursCode MT: 500 hoursCode NF: 500 hoursCode ZN: 500 hoursCode ZNU: 500 hoursCode UCR: 500 hoursHSand and dustMated connectors shall withstand the effectsof blowing sand and dustMIL-STD-810F, Method 510.4Fungus Connector materials shall be fungus inert. MIL-STD-810F, Method 508.5JFluid immersionNo visible damage from immersion invarious fuels and oils. Connector shall meetcoupling torque and dielectric withstandingvoltage requirements.EIA-364-10Unmated connectorsKLAltitude immersionNo evidence of moisture on connectorinterface or contacts. Connector shall meetdielectric withstanding voltage.EIA-364-03Wired crimp connectors withsupplemental potting. Printed circuitboard and solder cup connectors withstandard factory-installed potting.OutgassingThe entire connector assembly shall be capableof meeting a maximum Total Mass Loss (TML) of1% and a Total Collected Volatile Material Loss(TCVML) of 0.1% following additional processingfor outgassing control.ASTM-E595Dimensions in inches (millimeters) and are subject to change without notice.© 2010 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com B-28 E-Mail: sales@glenair.com01-JANUARY-2010