Glenair Mighty Mouse Connectors Catalog - Interstate Connecting ...

Series 80 Mighty Mouse Technical ReferenceComplete Product SpecificationReferenceDESCRIPTION REQUIREMENT PROCEDUREMECHANICALAVibration, sineNo discontinuity of greater than 1microseconds, no cracking, breaking orloosening of parts, plug shall not becomedisengaged from receptacle. Connectorsshall meet electrical requirements aftervibration test.MIL-STD-202 Method 204, testCondition G30 g’s, 3 axes, 4 hours per axisBCVibration, randomGunfire vibrationNo discontinuity of greater than 1microseconds, no cracking, breaking orloosening of parts, plug shall not becomedisengaged from receptacle. Connectorsshall meet electrical requirements aftervibration test.No discontinuity of greater than 1microseconds, no cracking, breaking orloosening of parts, plug shall not becomedisengaged from receptacle. Connectorsshall meet electrical requirements aftervibration test.EIA-364-28 Test Condition V Letter IIEC-60512-6-4100 milliamp test current50- 2,000 Hz37.80 g rmsMIL-STD-810F Method 519.5DEFMechanical shockNo discontinuity of greater than 1microsecond, no cracking, breaking orloosening of parts, plug shall not becomedisengaged from receptacle. Connectorsshall meet electrical requirements aftershock test.EIA-364-27 Condition DIEC-60512-6-33 shocks X 3 axes X 2 directions = 18shocks 2941 m/s 2 (300 g’s), 3 ms, halfsineGHMechanical durability, atambient temperatureNo deterioration which will adversely affectthe connector after 2000 cycles of matingand unmating. Connectors shall meetcontact resistance, insulation resistance,shell-to-shell resistance, DWV, and matingand unmating force.EIA-364-09IEC-60512-5 Test 9aJSolderability, PC tailcontacts95% solder coverage. Smooth, bright andeven finish.EIA-364-52 Category 3IEC-60512-12-1IEC-68-2-20 Test Ta, method 18 hours steam aging prior to test245° C, 4-5 sec. dwell10X magnificationKLResistance To SolderingHeatNo damage to connector. Connectors shallmeet insulation resistance and waterproofsealing requirements.EIA-364-56IEC-60512-12-5 Test 12e260° C, 10 seconds (PC tail)MDimensions in inches (millimeters) and are subject to change without notice.© 2010 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912www.glenair.com B-25 E-Mail: sales@glenair.com01-JANUARY-2010