Actel FPGAs - MSC Budapest Kft.

IGLOO ® Evaluation KitsStarting Your IGLOO DesignIGLOO Icicle Kitn IGLOO Icicle Evaluation Board withAGL125-QNG132 device– RoHS compliant– Battery powered via included lithiumionbattery and built-in charger fromUSB cable– Full current measurement capabilityof independent I/O banks and VCC foraccurate power analysis– Lowest power 125,000 systemgateFPGA in the world– Ultra-low power consumption indynamic, static, and Flash*Freezemodes– Low power enables a long battery lifefor a typical portable device– Ability to switch VCC from 1.2 V to1.5 V as needed– Ultra-small QN132 (8 x 8 mm) devicefitted inside a ring of connectors for aVQ100 device. The evaluation boardhas been designed for use with eitherpackage.– Optional board power connectorfor an external supply, but none isneeded when connected to an USBcablen FlashPro3 programmer built intolow-cost programming stick (LCPS)– Plugs directly into IGLOO Icicleevaluation board. An USB 2.0 highspeedcable plugs into the LCPS forprogramming of the IGLOO device.n Free one-year Libero IDE Goldlicense and softwaren Web download of Libero IDEsoftware CD– User’s guide and Libero IDE tutorial– PCB schematics and layout files– Example designsIGLOO Starter Kit 1) / Cortex-M1 IGLOO Development Kit 2)n Development board with anAGL600-FGG256 device 1)M1AGL1000-FGG484 device 2)– RoHS compliant– AGL600-FGG256 device fitted into thecenter 16 x 16 of a 22 x 22 array 1)orM1AGL1000-FGG484 device fitted inthe 22 x 22 array 2)– Full current measurement capabilityof independent I/O banks and VCC foraccurate power analysis– Clocks: Oscillator for system clockis provided– Eight LEDs and eight switchesprovide simple inputs and outputs tothe system.– USB programming and debug– Second USB connection for USBtoserial(RS232) interface, also allowspowering of the board– Optional board power connectorfor an external supply, but none isneeded when connected to an USBcable– Memory devices– 4 MB of SRAM provided on board– 16 MB of flash memory providedon board– General purpose I/O banks– Three 40-pin GPIO banks areprovided for interfacing to otherequipment. Two of these banksare fully populated.n FlashPro3 programmer builtinto boardn Power supplyn Free one-year Libero IDE Goldlicense and softwaren Web download of Libero IDEsoftware CD– User’s guide and Libero IDE tutorial– PCB schematics and layout files– Example designsGet your tool at www.msc-toolguide.com/actel9